Skip to the content
2 layers64 × 63 mmMacroPad Prod, the printed circuit board in 3D

This project was my introduction into hardware design with PCB. I would say this was pretty hard but after learning it I was able to become way more knowledgeable. I enjoyed this project a lot!

Size
64 × 63 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
14
Pads
60
Tracks, vias
46, 1
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Apr 2026
Updated
4 May 2026

Overview

MacroPad Prod is an open-source printed circuit board by RichardM1337, from the RichardM1337/macropad repository on GitHub, published under the MIT licence. It is a 2-layer board of 64 × 63 mm with 7 parts on 14 nets, routed with 46 tracks and 1 via.

Its parts include 6 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

README.md

MacroPad-for-Productivity

A MacroPad that will help enhance my workflow and productivity in writing documents.

This project was my introduction into hardware design with PCB. I would say this was pretty hard but after learning it I was able to become way more knowledgeable. I enjoyed this project a lot!

3D CAD Model

The case was built through AutoDesk Inventor, and I imported the 3D model of the pcb + components for a 3D view of the actual macropad.

CADCase2 CADCase1

PCB

KiCAD was used from schematics to the actual PCB design.

  • Schematic
  • Schematic
  • PCB with zones
  • PCB

Firmware

I used QMK for the macropad's firmware. I made the 5 keys have productivity enhancement commands such as copy and paste. The rotary encoder will be used for volume control.

BOM (Bill of Materials)

Parts

7
QtyValueFootprintReferences
5SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW6
1XIAO-RP2040-DIPxiaofootprints:XIAO-RP2040-DIPU1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the MacroPad Prod PCB?

It measures 64 × 63 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MacroPad Prod use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MacroPad Prod KiCad files?

From the RichardM1337/macropad repository on GitHub, at the commit this page was made from: the board is PCB/Libraries/MacroPad Prod.kicad_pcb and its schematic PCB/Libraries/MacroPad Prod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MacroPad Prod design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).