2 layers100 × 100 mm
2 layers73 × 31 mm
Giger counter addon
Richard42Graham/Giger-counter-addonthis is a addon board for a giger counter i got at a workshop.
- Size
- 73 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 27
- Pads
- 87
- Tracks, vias
- 324, 22
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Aug 2023
- Updated
- 6 Aug 2023
Overview
Giger counter addon is an open-source printed circuit board by Richard42Graham, from the Richard42Graham/Giger-counter-addon repository on GitHub. It is a 2-layer board of 73 × 31 mm with 25 parts on 27 nets, routed with 324 tracks and 22 vias.
It is built around the LM2596S-5.0 and LM1117-3.3. Its parts include 6 resistors, 6 connectors, 4 capacitors, 3 ICs and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
2
LM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdGiger-counter-addon
this is a addon board for a giger counter i got at a workshop.
its desigend as a addon bord.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 12K | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 330r | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 68uH | Inductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSoldering | L1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J6 |
| 1 | Beeper | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J2 |
| 1 | ESP8266-12F | phosphor:ESP8266-13F | U3 |
| 1 | Expanction | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J1 |
| 1 | FTDI | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | Giger counter conn | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | NSR0530HT1G | Diode_SMD:D_SOD-323 | D1 |
| 1 | R | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Vcc | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP1 |
| 1 | power-in | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
The 24 most common of 25 parts.
Similar boards
- 2 layers87 × 47 mm
- 2 layers165.1 × 154.9 mm
PCB Prototipo Proyecto Final
FrancoBisciglia/ProyectoFinal_PCB_Prototipo
PCB de la placa prototipo del Sistema de Automatización para Huertas Hidropónicas NFT
151 parts - 4 layers58.7 × 27 mm
- 2 layers320 × 136 mm
- 2 layers97.9 × 67.4 mm
EBS logic SMD
PUT-Motorsport/PUTM_DV_EBS_2022
A KiCad schematic and PCB project of the Emergency Brake System circuit board.
127 parts - 2 layers100.7 × 63.5 mm
- 2 layers201.9 × 54.6 mm
Questions
How big is the Giger counter addon PCB?
It measures 73 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Giger counter addon use?
25 parts, built around the LM2596S-5.0 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Giger counter addon KiCad files?
From the Richard42Graham/Giger-counter-addon repository on GitHub, at the commit this page was made from: the board is Giger-counter-addon.kicad_pcb and its schematic Giger-counter-addon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Giger counter addon design in my own project?
Its repository states no licence, so its author keeps all rights: ask Richard42Graham before reusing the design.