Skip to the content
2 layers42 × 115.8 mmZVS, the printed circuit board in 3D

3D printed 3-stage 1kJ projectile accelerator.

Size
42 × 115.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
9
Pads
45
Tracks, vias
66, 1
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Mar 2024
Updated
9 Dec 2024

Overview

ZVS is an open-source printed circuit board by Rhetticle, from the Rhetticle/The-Big-One repository on GitHub. It is a 2-layer board of 42 × 115.8 mm with 22 parts on 9 nets, routed with 66 tracks and 1 via.

Its parts include 5 resistors, 4 diodes, 3 transistors, 3 inductors and 2 capacitors.

README

README.md

The Big One

image0 (6)

https://github.com/user-attachments/assets/869daa6d-89cc-4672-a1f7-7d603dca1637

3D printed 3-stage 1kJ projectile accelerator.

Update

As of Febuary 2024, this device is no longer operational and has been salvaged for parts.

Safety Notice

  • This device was built purely to challenge myself with a complex engineering project to learn about electronics and was never intended to be used as a weapon
  • Certain parts of the build have been omitted from the repository to prevent those with malicious intent from replicating this device

Performance

  • Peak exit velocity (All capacitors charged to 385V) - 61 km/h
  • Peak exit energy (100g projectile) - 13.9 J
  • Efficiency - 1.4%

Hardware Details

All circuitry and PCBs were custom made, designed in Kicad and manufactured by JLCPCB with hardware provided by Digikey or homemade (e.g. transformer, power inductors etc)

Capacitors

The Big One uses three 4.5mF 400V chassis mount capacitors. The total energy in these capacitors at max operating voltage (385V) is approximately 1kJ.

Capacitor Charger

Capacitors were charged using a ZVS circuit driving a homemade step-up transformer (see below) to increase the 30VAC across the resonant capacitors of the ZVS up to 550VAC to be used to charge the high voltage capacitors. The average power output of this charger was around 300W when charging the entire bank of capacitors from 0V to 385V.

Control Board

The control board was mounted in the middle section. It uses an STM32F401RBT6 to control the timing of the three acceleration stages as well as measures the capacitor bank voltage. Four schottky diodes are also on the board to rectify the transformer output.

image0 (10)

Parts

22
QtyValueFootprintReferences
3Q_NMOS_GDSPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3
2470Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_HorizontalR1, R2
28mHInductor_THT:L_Toroid_Vertical_L26.7mm_W14.0mm_P10.16mm_Pulse_DL1, L3
2D_SchottkyDiode_THT:D_DO-201_P12.70mm_HorizontalD1, D2
2D_ZenerDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3, D4
2HeatsinkCoil Gun Capacitor:63710ABPEHS1, HS2
2LOGOLOGOG***, G***
2RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3, R4
110uFCapacitor_THT:C_Rect_L26.5mm_W11.5mm_P22.50mm_MKS4C2
115uHCoil Gun Capacitor:PrimaryL2
11kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR9
1CCapacitor_THT:C_Rect_L26.5mm_W11.5mm_P22.50mm_MKS4C1
1Screw_Terminal_01x04TerminalBlock:TerminalBlock_bornier-4_P5.08mmJ1

Similar boards

  • 2 layers158 × 11 mmDaylight Matchstick, the printed circuit board in 3D

    Daylight Matchstick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    22 parts1.1kGPL-3.0
  • 2 layers57 × 65 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    22 parts1kGPL-3.0
  • 2 layers81 × 57.2 mmRP2040-Macropad, the printed circuit board in 3D

    RP2040-Macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    22 parts915
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers66.4 × 24.5 mmConnecting piece, the printed circuit board in 3D

    Connecting piece

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    22 parts456
  • 2 layers51 × 70 mmDMG A04-01, the printed circuit board in 3D

    DMG A04-01

    HDR/NintendoPCBs

    Replacement pcb's for Nintendo games.

    22 parts321
  • 2 layers27.8 × 16 mmSpi 1v8 level shifter, the printed circuit board in 3D

    Spi 1v8 level shifter

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    22 parts253GPL-3.0

Questions

How big is the ZVS PCB?

It measures 42 × 115.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ZVS use?

22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ZVS KiCad files?

From the Rhetticle/The-Big-One repository on GitHub, at the commit this page was made from: the board is PCBs/ZVS/ZVS.kicad_pcb and its schematic PCBs/ZVS/ZVS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ZVS design in my own project?

Its repository states no licence, so its author keeps all rights: ask Rhetticle before reusing the design.