
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Changes the orientation of a 68000 DIP CPU.
68000Relocator is an open-source printed circuit board by RetroRejuvenation, from the RetroRejuvenation/68000Relocator repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 97.8 × 97 mm with 2 parts on 62 nets, routed with 548 tracks and 7 vias.
Changes the orientation of a 68000 DIP CPU.
Primarily created to allow the TerribleFire TF530 accelerator board to better fit within an Amiga 500 case.
Boards available to purchase here: https://dirtypcbs.com/store/designer/details/AwesomeInferno/4830/68000relocator-gerbers-1-zip (Disclaimer: I get a very small kickback on each set sold)

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 68000D | Housings_DIP:DIP-64_W22.86mm_Socket_LongPads | U1, U2 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 97.8 × 97 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RetroRejuvenation/68000Relocator repository on GitHub, at the commit this page was made from: the board is 68000Relocator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).