Skip to the content
2 layers49.8 × 27.9 mmBlinkenhat, the printed circuit board in 3D

Make your own funny blinking cloth.

Size
49.8 × 27.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
30
Pads
104
Tracks, vias
238, 16
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
30 Dec 2017
Updated
21 Feb 2018

Overview

Blinkenhat is an open-source printed circuit board by Retardigrades, from the Retardigrades/blinkenhat repository on GitHub, published under the MIT licence. It is a 2-layer board of 49.8 × 27.9 mm with 26 parts on 30 nets, routed with 238 tracks and 16 vias.

It is built around the ESP-12E. Its parts include 9 resistors, 6 connectors, 4 capacitors, 2 ICs and 2 diodes. It belongs with the ESP8266 boards of this library.

Main components

1

README

README.md

BlinkenHat

This is a project to enable people with limited knowledge in electronics or programming to build fancy flashing LED accessiors.

The documentation can be found at blinkenhat.org.

Contributing

If you want to contribute: Great, Thank you!

Contributions can have many faces. If you just found a Bug or a Glitch in the documentation and want to report it: use the issue tracker of this project and preport your finding. We will do our best to help you.

If you want to give feedback and ideas, then also the issue tracker is the place to put it. We will discuss it there and see if and how its possible.

To actually contribute code, fix bugs or improve the documentation, you can fork the repositioy, make your changes and provide a PullRequest back. We try to review and merge all contributions as soon as possible. To keep things readable, please format all your code according to the LLVM code style. The easiest way to achieve this is to use the clang-format tool. Just run it over your code before you commit:

text
$ clang-format -style=LLVM -i <filename>

Releases

v0.7: Big Wifi Release

This release finally makes the WiFi much more stable and useable.

Major changes:

  • Select the WiFi channel with the least networks.
  • Double the CPU speed to 160MHz.
  • Drop unnecessary blocking after LED write.
  • Fix some glitches in the twinkle effect.
  • Add a lot of documentation.

v0.6: Burning Bär release

The first big improvement of the software gives you a clearer user Interface, the possibility to change effects and a new twinklng star effect.

Mayor changes:

  • The userinterface is now more descriptive what the settings mean.
  • The AppBar with the save button is now always visible
  • Effects can now be removed
  • Effects can now be added
  • Effects can operate on a channel as one whole strip without dividing it
  • New effect: twinkling stars
  • The number of LEDs can now be set from 2 to 100
  • Documentation is growing (published at blinkenhat.org)
  • The visibility of the dot effect works now with other values than 100%

v0.5: First public release

This is basically the release that was distributed with the first version of the workshop.

Parts

26
QtyValueFootprintReferences
710KResistors_SMD:R_0603R1, R2, R3, R4, R5, R6, R8
22N7002TO_SOT_Packages_SMD:SOT-23Q1, Q2
23.3KResistors_SMD:R_0603R7, R9
2DDO214:DO-214AC(SMA)D1, D2
1100nCapacitors_SMD:C_0603C4
1100µCapacitors_Tantalum_SMD:CP_Tantalum_Case-C_EIA-6032-28_ReflowC3
1200µCapacitors_Tantalum_SMD:CP_Tantalum_Case-C_EIA-6032-28_ReflowC1
122µCapacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_ReflowC2
1AMS1117-3V3TO_SOT_Packages_SMD:SOT-223U1
1ESP-12EESP8266:ESP-12EU2
1GPIOPin_Headers:Pin_Header_Straight_2x05_Pitch1.27mmJ6
1INPUTConnectors_JST:JST_XH_B03B-XH-A_03x2.50mm_StraightJ3
1LED1Connectors_JST:JST_XH_B03B-XH-A_03x2.50mm_StraightJ1
1LED2Connectors_JST:JST_XH_B03B-XH-A_03x2.50mm_StraightJ2
1ProgrammerPin_Headers:Pin_Header_Straight_2x04_Pitch2.54mmJ4
1RESETButtons_Switches_SMD:SW_SPST_PTS645SW1
1USB_POWERConnectors:USB_Micro-B_10103594-0001LFJ5

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0
  • 2 layers25.6 × 23 mmBreakout, the printed circuit board in 3D

    Breakout

    skorokithakis/tiny-ESP8266-breakout

    A very small and basic ESP8266 breakout board

    12 parts115BSD-2-Clause
  • 2 layers104.8 × 72.1 mmSST V2 4, the printed circuit board in 3D

    SST V2 4

    mcbittech/souliss-smart-thermostat-WiFi

    ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

    53 parts110GPL-2.0
  • 2 layers30 × 65 mmHardpass pcb, the printed circuit board in 3D

    Hardpass pcb

    girst/hardpass-passwordmanager-mirror-of-git.gir.st

    https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.

    34 parts101GPL-3.0
  • 2 layers82.5 × 22.4 mmWindow Sensor, the printed circuit board in 3D

    Window Sensor

    MakerMeik/Window-Sensor

    Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w

    19 parts67
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layers100 × 45 mmTranspOtterNG, the printed circuit board in 3D

    TranspOtterNG

    Jana-Marie/transpOtterNG

    Next Generation of TranspOtter.

    63 parts51

Questions

How big is the Blinkenhat PCB?

It measures 49.8 × 27.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Blinkenhat use?

26 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Blinkenhat KiCad files?

From the Retardigrades/blinkenhat repository on GitHub, at the commit this page was made from: the board is hardware/blinkenhat/blinkenhat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Blinkenhat design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).