2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers
Arduino shield
RepRapLtd/6DInput54Project to create an open-source 6 DoF input device
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 31
- Pads
- 60
- Tracks, vias
- 29, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Apr 2021
- Updated
- 8 Apr 2022
Overview
Arduino shield is an open-source printed circuit board by RepRapLtd, from the RepRapLtd/6DInput repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 12 parts on 31 nets, routed with 29 tracks and 0 vias.
Its parts include 10 connectors and 1 resistor. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
README
Electronics/README.mdKicad files in here.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8, J9, J10 |
| 1 | 180R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Arduino_UNO_R3_Shield | reprapltd-kicad:Arduino_UNO_R3_Shield | A1 |
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
What parts does the Arduino shield use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino shield KiCad files?
From the RepRapLtd/6DInput repository on GitHub, at the commit this page was made from: the board is RepRapLtd/Electronics/arduino-shield/arduino-shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino shield design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).