Skip to the content
2 layers68.6 × 53.3 mmUSB Power Armor Type A Tester Shield, the printed circuit board in 3D

USB Power Armor Type A Tester Shield

ReclaimerLabs/USB-Power-Armor-Type-A-Tester-Shield

An Arduino Shield for easier testing of USB Power Armor Type-A

Size
68.6 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
33
Pads
64
Tracks, vias
116, 4
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
18 Feb 2016
Updated
18 Feb 2016

Overview

USB Power Armor Type A Tester Shield is an open-source printed circuit board by ReclaimerLabs, from the ReclaimerLabs/USB-Power-Armor-Type-A-Tester-Shield repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 15 parts on 33 nets, routed with 116 tracks and 4 vias.

Its parts include 6 connectors, 5 resistors, 2 diodes and 1 switch.

Parts

15
QtyValueFootprintReferences
21MResistors_SMD:R_1206_HandSolderingR1, R2
2330RCapacitors_SMD:C_1206_HandSolderingR3, R4
2CONN_01X08Pin_Headers:Pin_Header_Straight_1x08J4, J5
2LEDLEDs:LED-1206D1, D2
110kResistors_SMD:R_1206_HandSolderingR5
1CONN_01X06Pin_Headers:Pin_Header_Straight_1x06J6
1CONN_01X10Pin_Headers:Pin_Header_Straight_1x10J3
1LOGOJason_Libraries:Reclaimer_LabsG***
1SW_PUSHJason_Libraries:SW_Tact_PTS645S_SMDSW1
1USB_AJason_Libraries:USB_A_Female_SMDJ1
1USB_BJason_Libraries:USB-B_SMT_4pinJ2

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the USB Power Armor Type A Tester Shield PCB?

It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB Power Armor Type A Tester Shield use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB Power Armor Type A Tester Shield KiCad files?

From the ReclaimerLabs/USB-Power-Armor-Type-A-Tester-Shield repository on GitHub, at the commit this page was made from: the board is electrical/USB-Power-Armor-Type-A-Tester-Shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB Power Armor Type A Tester Shield design in my own project?

Its repository states no licence, so its author keeps all rights: ask ReclaimerLabs before reusing the design.