2 layers70 × 35 mm
2 layers48.3 × 52.1 mm
Remote Thermal Monitor
ReclaimerLabs/Remote-Thermal-MonitorA wifi enabled thermocouple reader
- Size
- 48.3 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 46
- Pads
- 184
- Tracks, vias
- 361, 33
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Jan 2017
- Updated
- 30 Jan 2017
Overview
Remote Thermal Monitor is an open-source printed circuit board by ReclaimerLabs, from the ReclaimerLabs/Remote-Thermal-Monitor repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.3 × 52.1 mm with 41 parts on 46 nets, routed with 361 tracks and 33 vias.
Its parts include 16 capacitors, 16 resistors, 3 ICs, 3 crystals and 2 connectors. It belongs with the radio and wireless boards of this library.
README
README.mdIntroduction
This board is a remote thermocouple monitor. It is pretty much a direct implementation of App Note SBAA189 from TI. It uses a TI ADS1118 to read the thermocouple and a Particle Photon to connect via WiFi to the Internet.
The first intended use was to monitor furnances in a materials science laboratory, providing a way for researchers to check on the health of the furnance from home without having to physically go to the lab.
Getting Started
The fastest way to get started is to run the Particle app on your phone to claim the Photon, then flash the example app through the Web IDE. Detailed step-by-step instructions are located here. The example app updates the temperature to the SparkFun Data stream and the Particle cloud once every five minutes or so.
You can find the firmware libraries on github for the ADS1118 and for thermocouples.
Questions and Comments
If you have questions or comments, you can email me directly at jason@reclaimerlabs.com.
License
The MIT License (MIT)
Copyright 2017 Jason Cerundolo
Permission is hereby granted, free of charge, to any person obtaining a copy of this hardware, software, and associated documentation files (the "Product"), to deal in the Product without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Product, and to permit persons to whom the Product is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Product.
THE PRODUCT IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE PRODUCT OR THE USE OR OTHER DEALINGS IN THE PRODUCT.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitors_SMD:C_0603 | C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 8 | 1M | Capacitors_SMD:C_0603 | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 500R | Capacitors_SMD:C_0603 | R9, R10, R11, R12, R13, R14, R15, R16 |
| 4 | 1uF | Capacitors_SMD:C_0603 | C1, C2, C3, C4 |
| 3 | MTHOLE | Reclaimer_Labs:MountingHole_3.5mm_Pad_Via | X1, X2, X3 |
| 2 | 0.01uF | Capacitors_SMD:C_0603 | C15, C16 |
| 2 | ADS1118 | Reclaimer_Labs:VSSOP-10 | U1, U2 |
| 1 | CONN_01X08 | Reclaimer_Labs:TERM-BLOCK-3.5MM-8 | J1 |
| 1 | EXPANSION | Reclaimer_Labs:HEADER_10_POL | J2 |
| 1 | LOGO | Reclaimer_Labs:Reclaimer_Labs | G*** |
| 1 | PHOTON | Reclaimer_Labs:PHOTON | U3 |
Similar boards
- 2 layers270 × 11 mm
Daylight Disco
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
41 parts1.1kGPL-3.0 - 2 layers27.5 × 48.3 mm
ICE40DevBoard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
41 parts915 - 2 layers45 × 25 mm
Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
41 parts599 - 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
41 parts517GPL-2.0 - 2 layers96.1 × 78.6 mm
EYEBROW WARNING INDICATOR LEFT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
41 parts431 - 2 layers37 × 15 mm
- 2 layers20.3 × 69.7 mm
PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
41 parts276CERN-OHL-S-2.0
Questions
How big is the Remote Thermal Monitor PCB?
It measures 48.3 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remote Thermal Monitor use?
41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote Thermal Monitor KiCad files?
From the ReclaimerLabs/Remote-Thermal-Monitor repository on GitHub, at the commit this page was made from: the board is electrical/Remote Thermal Monitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote Thermal Monitor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).