
Well depth battery
hansgaensbauer/Well-Monitor
Well monitoring equipment for Engineers Without Borders

An ESC and firmware suitable for sensored 2205 gimbal motors
Servo is an open-source printed circuit board by ReFil, from the ReFil/gimbal-motor-servo repository on GitHub, published under the MIT licence. It is a 4-layer board of 24.5 × 45.9 mm with 24 parts on 54 nets, routed with 371 tracks and 73 vias.
It is built around the ATSAMD21E17D-MU, TMC6300-LA-T and USBLC6-2P6, with the 0.5K-1.2W-10PWB among its other parts. Its parts include 7 capacitors, 5 ICs, 3 resistors, 3 connectors and 1 switch. It belongs with the robots and motor control boards and the SAM D and SAM boards of this library.
An ESC and firmware suitable for sensored 2205 gimbal motors
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C5, C6 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C7 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 0.5K-1.2W-10PWB | common:CONN-SMD_10P-P0.50_0.5K-1.2W-10PWB | FPC1, FPC2 |
| 2 | 5.1k | common:R_0402_1005Metric | R2, R3 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | ATSAMD21E17D-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U1 |
| 1 | Conn_01x04_MountingPin | Connector_Molex:Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_Vertical | J2 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | LDK130PU33R_DFN6 | Package_DFN_QFN:DFN-6_1.3x1.2mm_P0.4mm | U4 |
| 1 | MA730 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm | U3 |
| 1 | MOMENTARY-SWITCH-SPST-SMD-4.6X2.8MM | common:TACTILE_SWITCH_SMD_4.6X2.8MM | S1 |
| 1 | TMC6300-LA-T | common:QFN40P300X300X90-21N | U2 |
| 1 | USBLC6-2P6 | common:SOT-666 | U5 |
| 1 | XKB-USB-C16PIN | common:XKB-USB-C-16P | J5 |

hansgaensbauer/Well-Monitor
Well monitoring equipment for Engineers Without Borders






felop/HapticKnob
Haptic knob inspired by @scottbez1, designed to model different indent shapes

SaikoJuanma/phone_replacement
this projects aims to create a replacement for the phone, so I can stop using my phone on the home and get rid off distractions. ## Upcoming features 1. Timer and alarm. 2. PCB and schematics for the project. 3.
It measures 24.5 × 45.9 mm and has 4 copper layers, 1 mm thick.
24 parts, built around the ATSAMD21E17D-MU, TMC6300-LA-T, USBLC6-2P6 and 0.5K-1.2W-10PWB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ReFil/gimbal-motor-servo repository on GitHub, at the commit this page was made from: the board is PCB/servo.kicad_pcb and its schematic PCB/servo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).