2 layers50 × 80 mm
4 layers329 × 109 mm
Fotm sign
ReFil/fotm-signFriends of the Moon EMF village sign
- Size
- 329 × 109 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 321
- Nets
- 163
- Pads
- 963
- Tracks, vias
- 1,249, 347
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 Jun 2026
- Updated
- 27 Jun 2026
Overview
Fotm sign is an open-source printed circuit board by ReFil, from the ReFil/fotm-sign repository on GitHub, published under the Unlicense licence. It is a 4-layer board of 329 × 109 mm with 321 parts on 163 nets, routed with 1,249 tracks and 347 vias.
It is built around the SK6805SIDE-G-003. Its parts include 160 capacitors, 160 ICs and 1 connector.
Main components
1Parts
321| Qty | Value | Footprint | References |
|---|---|---|---|
| 160 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +144 |
| 160 | SK6805SIDE-G-003 | easyeda2kicad:LED-SMD_4P-L3.5-W1.6_SK6805SIDE-G-001 | U1, U10, U11, U100, U101, U102, U103, U104, U105, U106, U107, U108, U109, U110, U111, U112 +144 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
Similar boards
- 6 layers187 × 109 mm
- 2 layers
- 4 layers104 × 69.4 mm
- 4 layers89 × 58 mm
- 4 layers99.8 × 94.6 mm
Oresat rw card
oresat/oresat-adcs-hardware
Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers
321 parts21GPL-2.0 - 4 layers320 × 320 mm
- 4 layers94.3 × 81.8 mm
YukaLink revA
Misaka0x2730/YukaLink
Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.
321 parts3GPL-3.0
Questions
How big is the Fotm sign PCB?
It measures 329 × 109 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Fotm sign use?
321 parts, built around the SK6805SIDE-G-003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fotm sign KiCad files?
From the ReFil/fotm-sign repository on GitHub, at the commit this page was made from: the board is fotm-sign.kicad_pcb and its schematic fotm-sign.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fotm sign design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).