
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A small macropad programmed using arduino featuring programmable key sets, a knob and an oled screed
MainPad is an open-source printed circuit board by Raphael-Leb, from the Raphael-Leb/Arduino-Macro-Pad repository on GitHub. It is a 2-layer board of 47.5 × 109.9 mm with 25 parts on 26 nets, routed with 144 tracks and 3 vias.
Its parts include 9 ICs and 8 switches. It belongs with the keyboards and input boards and the ESP32 and RISC-V boards of this library.
A small macropad programmed using arduino featuring programmable key sets, a knob and an oled screed
Xiao rp2040 microcontroller
Cherry mx keys
An oled screen displaying the shortcuts set
A clickable rotary encoder knob
The pcb was made using kicad, the design files are in Mainpad/PCBfiles.
The keys are not organised properly, they need to be rearanged to match with the schematic. The keys are also not spaced enough for regular keycaps
The gerber files are in Mainpad/ProdFiles, these should be all you need to produce more copies if you are unexperienced with pcb software
The entire software is made with arduino, the firmware_2040.ino contains the logic and the pins.h contains the configuration for configuring layout as well as shortcuts. I tried to make this with a xiao esp32c3, but couldn't get the bluetooth keyboard and bluetooth mouse library working at simultanuously, so let me know if you find a fix. For now this will only work as a wired keypad. I will be making a frontend for configuring the pins.h in the near future.
The casing was made in solidworks with several models I found on grabcad.
I had to make custom keycaps because the keys were too close together to fit standard caps, I followed the footprint's spacing but should've double checked if it was correct.
I first modeled a casing with the pcb tilted upward to fit the angle of my keyboard, but then decided on making it flat instead. The files are still there if that's what you prefer, but they are incomplete.
Initialy tried to make a press fit casing, but spacing proved to be quite a pain to nail down considering how 3d printed plastic warps. I used 6 m3 screws to secure everything.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D_Small | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | U2, U3, U4, U5, U6, U7, U8, U9 |
| 8 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | Hole1, Hole2, Hole3, Hole4 |
| 1 | Battery | Battery:Battery_Panasonic_CR1025-VSK_Vertical_CircularHoles | BT1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | Knob1 |
| 1 | SSD1306 | SSD1306:128x64OLED | Screen1 |
| 1 | SW_DPDT_x2 | Assorted parts:SLIDE-SWITCH | PoweSwitch1 |
| 1 | Xiao-esp32c3 | Shogi:Seeeduino_XIAO-MOUDLE14P-2.54-21X17.8MM | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 47.5 × 109.9 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Raphael-Leb/Arduino-Macro-Pad repository on GitHub, at the commit this page was made from: the board is MainPad/PCBfiles/MainPad.kicad_pcb and its schematic MainPad/PCBfiles/MainPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Raphael-Leb before reusing the design.