

Hackpad V2
This is my very cool hackpad, with a oled screen, a rotary encoder with a switch and 6 switches.
- Size
- 84 × 59.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 20
- Pads
- 71
- Tracks, vias
- 128, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Jul 2026
- Updated
- 15 Jul 2026
Overview
Hackpad V2 is an open-source printed circuit board by Random1011010, from the Random1011010/My-Very-Cool-HackPad repository on GitHub, published under the MIT licence. It is a 2-layer board of 84 × 59.5 mm with 19 parts on 20 nets, routed with 128 tracks and 0 vias.
Its parts include 7 switches, 6 diodes, 1 IC and 1 connector. It belongs with the lEDs and displays boards of this library.
README
README.mdMy Very Cool HackPad
A 6-key macropad with a rotary encoder (push-button) and a 128x32 OLED display, built around the Seeed Studio XIAO RP2040. The OLED runs an idle-animated "Luna" sprite that cycles through sit, walk, run, sleep, and work.
About me
I'm a Grade 10 (going into Grade 11) student, I am interested in aerospace, but I wanted to get real hands-on experience with hardware and PCB design before jumping into anything bigger. This was my first full custom PCB build, so a lot of this project was just learning by doing.
Inspiration & Challenges
I wanted something I'd actually use, not just a demo board but rather, media controls, screen brightness, and a few shortcuts I use constantly (Spotlight, screenshot, undo/redo). The OLED also mattered to me too, I didn't want it just showing static text, so it runs a small animated character instead.
Most of the challenges were on the PCB and case side, since this was my first time doing either seriously. In KiCad, I had to fix a missing net label on one of the matrix columns, and ran into alignment issues while placing components that took a while to track down. Getting the rotary encoder's footprint right was its own thing.
The case went through a full rebuild. I first modeled it with not a clue how to I would get the keys to line up with the PCB, then rebuilt it in Fusion 360, sketch by sketch, to match Hack Club's submission format, while keeping the board dimensions (84x59.5mm), switch spacing, and heatset insert placement consistent with the original.
On the firmware side, I wrote the QMK code for the matrix, the encoder (volume normally, brightness when you hold the encoder's button), and the OLED animation, I adapted an open-source Luna sprite animation to loop continuously instead of reacting to typing, since I wanted it to feel more like a little idle character than a status display. (Hopefully it works)
Features
- 6-key matrix (2 rows x 3 columns)
- Rotary encoder with push-button:
- Rotate: volume up/down (default)
- Hold + rotate: screen brightness up/down
- Short tap: play/pause
- 128x32 I2C OLED with an idle-animated Luna sprite
- QMK firmware, fully open source
Bill of Materials (BOM)
| Part | Qty | Unit Cost | Total | Notes |
|---|---|---|---|---|
| Seeed Studio XIAO RP2040 | 1 | $5.00 | $5.00 | Main MCU |
| Cherry MX-style switches | 6 | $0.35 | $2.10 | |
| Keycaps | 6 | $0.30 | $1.80 | |
| Rotary encoder (EC11) with push-button | 1 | $0.90 | $0.90 | |
| 128x32 I2C OLED display (SSD1306) | 1 | $5.90 | $5.90 | |
| Custom PCB | 1 | ~$5.00 | $5.00 | 2-layer, JLCPCB/similar, price for small qty |
| 3D printed case | 1 | ~$3.00 | $3.00 | Filament cost estimate |
| M3 heatset inserts | 6 | $0.10 | $0.60 | |
| Diodes | 6 | $0.05 | $0.30 | 1N4148, one per switch |
| Total | ~$24.60 |
Pinout
| Function | Pin |
|---|---|
| Matrix rows | GP26, GP27 |
| Matrix cols | GP29, GP0, GP3 |
| Encoder A/B | GP2, GP1 |
| Encoder switch | GP28 |
| OLED SDA | GP6 |
| OLED SCL | GP7 |
Photos
Exploded View
Schematic:
PCB:
Case:
Firmware
Written in QMK. Full source is in the firmware/ folder — see firmware/myverycoolpad/readme.md for build/flash instructions.
Status
Parts haven't arrived yet, so the physical build and OLED orientation are untested. Firmware compiles cleanly with qmk compile -kb myverycoolpad -km default.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 6 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | MOUDLE-SEEEDUINO-XIAO | footprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW7 |
The 15 most common of 19 parts.
Similar boards
- 2 layers43.9 × 27.7 mm

- 2 layers50 × 60 mm

Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm

ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm

- 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm

- 2 layers25.4 × 25.4 mm

Ina169
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
19 parts282 - 2 layers58.4 × 28.6 mm

New rele
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
19 parts269
Questions
How big is the Hackpad V2 PCB?
It measures 84 × 59.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hackpad V2 use?
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hackpad V2 KiCad files?
From the Random1011010/My-Very-Cool-HackPad repository on GitHub, at the commit this page was made from: the board is PCB Files/Hackpad V2.kicad_pcb and its schematic PCB Files/Hackpad V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hackpad V2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).