Skip to the content
2 layers100 × 80 mmFall sensor, the printed circuit board in 3D

Fall Sensor System: IoT Firmware (ESP32 C1001/LD2410 + ATtiny85), KiCad 10.0 PCB & Schematics, and Android Companion App

Size
100 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
42
Pads
96
Tracks, vias
212, 30
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Aug 2026
Updated
30 Sep 2026

Overview

Fall sensor is an open-source printed circuit board by RajatG, from the RajatG/FallSensorSystem repository on GitHub. It is a 2-layer board of 100 × 80 mm with 21 parts on 42 nets, routed with 212 tracks and 30 vias.

Its parts include 7 ICs, 5 capacitors, 3 resistors, 2 switches and 1 diode. It belongs with the sensors and measurement boards and the ESP32 and AVR (ATmega, ATtiny) boards of this library.

README

hardware/README.md

🔌 Hardware CAD & PCB Engineering (KiCad 10.0)

This directory contains the complete electronic schematic and PCB design files for the Fall Sensor System prototype (Rev A).


📁 Hardware Files

File / FolderTypeDescription
fall_sensor.kicad_schSchematicMain system schematic in KiCad 10 format.
fall_sensor.kicad_pcbPCB Layout2-layer, $100.00 \times 80.00\text{ mm}$ printed circuit board layout.
fall_sensor.kicad_proProject ConfigKiCad project workspace and design rules.
FallSensor.kicad_symSymbol LibraryCustom schematic symbols for breakout modules.
FallSensor.pretty/Footprint LibraryCustom PCB footprints for daughterboards and sensors.
export/Production FilesManufacturing Gerbers and printable PDF packages.

📐 PCB Specifications

  • Board Dimensions: $100.00\text{ mm} \times 80.00\text{ mm}$
  • Layer Count: 2-Layer FR4 ($1.6\text{ mm}$ thickness, $1\text{ oz}$ / $35\mu\text{m}$ copper)
  • Design Rule Status: 0 DRC Errors, 0 Unconnected Nets
  • Power Architecture: Dual switched rails (Protected Li-Ion Battery $\rightarrow$ 5.0V Boost $\rightarrow$ 3.3V Step-Down).
  • Radar Gating: High-side/low-side N-Channel MOSFET load switch controlled via GPIO 27.

📌 Microcontroller Pinout & Net Mapping

ESP32 DevKit V1 (30-Pin) Net Connections

Pin #LabelConnected NetHardware Destination & Role
13V3+3V3Regulated 3.3V power input from U7 buck converter
5GPIO34/BATT_ADCMidpoint of 100kΩ/100kΩ battery sensing divider
8GPIO33Net-(U1-GPIO33)Tactile Sync & Alarm Clear Button (SW1)
9GPIO25/PRESENCEC1001 radar hardware presence flag (OUT1)
10GPIO26/FALLC1001 radar hardware fall detection flag (OUT2)
11GPIO27/RADAR_ENLoad switch gate control (energizes radar power rail)
14GNDGNDCommon system ground plane
15GPIO13/PIR_WAKEMotion wake interrupt from ATtiny85 Sentinel (PB2)
19GPIO19Net-(U1-GPIO19)Status Fall Alarm LED (D1) via 270Ω resistor
26GPIO17/RADAR_RXHardware UART RX $\leftarrow$ C1001 radar TX
27GPIO16/RADAR_TXHardware UART TX $\rightarrow$ C1001 radar RX
28GPIO4/MIC_WAKEAcoustic impact wake interrupt from ATtiny85 Sentinel (PB0)

ATtiny85 Sentinel Pin Mapping

Pin #LabelConnected NetHardware Destination & Role
2PB4Net-(U2-P4)Digital acoustic trigger input from LM393 (DO)
5PB1Net-(PIR1-OUT)Digital motion trigger input from AM312 PIR (OUT)
6PB0/MIC_WAKEActive-HIGH 50ms wake pulse to ESP32 GPIO4
4PB2/PIR_WAKEActive-HIGH 50ms wake pulse to ESP32 GPIO13
7GNDGNDCommon ground
8VINUnconnectedBypassed (Digispark onboard regulator not used)
95V/VCC+3V3Regulated 3.3V power input from U7 buck converter

📦 Manufacturing & Test Deliverables


📖 Detailed Engineering References

Parts

21
QtyValueFootprintReferences
20.1uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC7, C8
2100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
110uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1
122uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC4
1270Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
1470uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC3
1AM312_PIRFallSensor:AM312_PIR_Square22x20PIR1
1BATTERY_PADSConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
1Buck ConverterFallSensor:LM2596_ModuleU7
1C1001_RadarFallSensor:C1001_ModuleRADAR1
1Digispark_ATtiny85Digispark_9Pin_RightAngleU2
1ESP32_DevKit_V1FallSensor:ESP32_DevKit_DOIT_2x15U1
1LATCH_PWRConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW2
1LEDLED_THT:LED_D3.0mmD1
1LM393_Sound_ModuleFallSensor:LM393_Sound_ModuleU5
1LoadSwitch_DBVTDIP-6_W10.16mmU6
1MT3608_ModuleFallSensor:MT3608_ModuleU3
1SYNCButton_Switch_THT:SW_PUSH_6mmSW1
1TP4056_ModuleFallSensor:TP4056_ModuleU4

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Fall sensor PCB?

It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fall sensor use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fall sensor KiCad files?

From the RajatG/FallSensorSystem repository on GitHub, at the commit this page was made from: the board is hardware/fall_sensor.kicad_pcb and its schematic hardware/fall_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fall sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask RajatG before reusing the design.