
Controller board
Raghav67816/NID-24
An EMG based human device interface, integrating edge device continuous feature extraction for better identification of signals during muscle fatigue.

An EMG based human device interface, integrating edge device continuous feature extraction for better identification of signals during muscle fatigue.
Pcb itr2 is an open-source printed circuit board by Raghav67816, from the Raghav67816/NID-24 repository on GitHub. It is a 2-layer board of 23.5 × 28.1 mm with 28 parts on 34 nets, routed with 197 tracks and 16 vias.
It is built around the SPX5205M5-L-5-0/TR. Its parts include 12 resistors, 8 capacitors, 4 connectors, 2 ICs and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R9 |
| 3 | 1uF | C0603C223J5RACTU:CAPC1608X87N | C1, C4, C8 |
| 2 | 22pF | C0603C223J5RACTU:CAPC1608X87N | C5, C6 |
| 1 | 0.1 uF | C0603C223J5RACTU:CAPC1608X87N | C7 |
| 1 | 0.1uF | C0603C223J5RACTU:CAPC1608X87N | C3 |
| 1 | 1 M Ohms | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1.5 nF | C0603C223J5RACTU:CAPC1608X87N | C2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 12K Ohm | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 1M Ohm | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1M Ohms | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 220 Ohms | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 22K Ohm | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 4.096 MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | ADS1293CISQ/NOPB | ADS1293CISQ_NOPB:QFN50P500X500X80-29N | U1 |
| 1 | Breakout Pins | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Power Input | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | RSTB_J | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J2 |
| 1 | SPX5205M5-L-5-0/TR | SPX5205M5_L_5_0_TR:SP6201EM5 | U2 |

Raghav67816/NID-24
An EMG based human device interface, integrating edge device continuous feature extraction for better identification of signals during muscle fatigue.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
It measures 23.5 × 28.1 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the SPX5205M5-L-5-0/TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Raghav67816/NID-24 repository on GitHub, at the commit this page was made from: the board is ads1293_board/iter2/pcb_itr2.kicad_pcb and its schematic ads1293_board/iter2/pcb_itr2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Raghav67816 before reusing the design.