
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Custom tamagotchi with a super small formfactor and can help you larp building hardware. Made using the good old ESP32 C3 Supermini, an 0.96 oled panel, three smol tactile switches, buzzer, and a battery ofc with a…
Tamagotchi is an open-source printed circuit board by Ragh7av, from the Ragh7av/Tamagotchi repository on GitHub, published under the MIT licence. It is a 2-layer board of 34 × 68 mm with 10 parts on 22 nets, routed with 86 tracks and 0 vias.
Its parts include 3 switches and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Super smol tamagotchi pet for you!
Custom tamagotchi with a super small formfactor and can help you larp building hardware. Made using the good old ESP32 C3 Supermini, an 0.96 oled panel, three smol tactile switches, buzzer, and a battery ofc with a custom PCB and a 3D printed case!
to larp as a super smol cyberpet is cool asf.
Feeding: Fills the hunger meter (much like a crunchy kfc) with sound effects
Playing: Yooo... Pauses the normal world to launch the falling-item arcade game. Catching items makes the pet superrrr happy but sadlyy acts as a 20% battery tax on its energy.
Sleeping: Dims the screen into a snoozee/ sleeping mode, locking the controls until its energy battery safely recharges back to 100% and get's into full powerr.
Download the necessary files from this repository:
Now collect all the hardware components. You will need an ESP32-C3 Supermini, a 0.96-inch I2C OLED display, three 6mm tactile switches, a buzzer and a battery cell.
To assemble the hardware follow these steps:
To set up the software environment follow these steps:
To install the library and flash the firmware follow these steps:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | SW_Push_Dual | footprints:430182043816 | SW4, SW5, SW6 |
| 1 | Battery_Cell | footprints:TE_282837-2 | BT1 |
| 1 | Buzzer | footprints:BUZ-TH_BD9.6-P5.00-D0.6-FD_XHXDZ-TMB9650-5V | BZ1 |
| 1 | DM-OLED096-636 | footprints:128x64OLED SSD1306 | U2 |
| 1 | ESP32-C3_SUPERMINI_TH | footprints:MODULE_ESP32-C3_SUPERMINI_TH | U1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 34 × 68 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ragh7av/Tamagotchi repository on GitHub, at the commit this page was made from: the board is PCB/Tamagotchi.kicad_pcb and its schematic PCB/Tamagotchi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).