
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

The full schematic and gerbers for the Nintendo DS Trainer Toolkit by Datel
REF1790 is an open-source printed circuit board by RWeick, from the RWeick/REF1790-NDS-Trainer-Toolkit repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53.1 × 60 mm with 35 parts on 129 nets, routed with 1,194 tracks and 154 vias.
Its parts include 12 resistors, 10 capacitors, 3 ICs, 2 connectors and 1 diode. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
The full schematic and gerbers for the Nintendo DS Trainer Toolkit by Datel. The original PCB has a bodged 1k Ohm resistor on it. The traces have been corrected so that it is no longer necessary, and a SMD resistor is used instead.
PCB Thickness: 0.8 mm

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF 0805 | Trainer Toolkit:SMD Cap and Res | C4, C5, C6, C7, C8, C9 |
| 4 | 10pF 0805 | Trainer Toolkit:SMD Cap and Res | C1, C2, C3, C10 |
| 3 | 100k Ohm 0805 | Trainer Toolkit:SMD Cap and Res | R5, R6, R8 |
| 3 | 10k Ohm 0805 | Trainer Toolkit:SMD Cap and Res | R7, R10, R11 |
| 2 | 1k Ohm 0805 | Trainer Toolkit:SMD Cap and Res | R9, R12 |
| 2 | 33 Ohm 0805 | Trainer Toolkit:SMD Cap and Res | R1, R2 |
| 2 | Through Hole | Trainer Toolkit:Through Hole | Hole, Hole1 |
| 1 | clipboard:867ee1a9-3078-458d-9784-2b6d66f4ccf8 | DiodeIndicator | |
| 1 | 1.5k Ohm 0805 | Trainer Toolkit:SMD Cap and Res | R3 |
| 1 | 12 MHz Crystal | Trainer Toolkit:Crystal Clock | Y1 |
| 1 | 1F - BC847B | Trainer Toolkit:Transistor | Q1 |
| 1 | 51k Ohm 0805 | Trainer Toolkit:SMD Cap and Res | R4 |
| 1 | ACTEL ProASIC Plus APA075-F | GBA:GBA AR Max FPGA | U2 |
| 1 | DIODE | Trainer Toolkit:Diode | D1 |
| 1 | Jumper_2_Open | Trainer Toolkit:Jumper Pads | JP1 |
| 1 | K6R4016V1D-UC10 | Trainer Toolkit:K6R4016V1D-UC10 | U1 |
| 1 | LPC2142 Programming Connector | Trainer Toolkit:LPC Programming Port | J1 |
| 1 | LPC2142FBD64 | Trainer Toolkit:LPC2142 | U3 |
| 1 | System_Edge_Connector | GBA:Edge Connector | J2 |
| 1 | USB_B_Mini | GBA:USB_Mini_B | USB1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.




It measures 53.1 × 60 mm and has 2 copper layers, 1.6 mm thick.
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RWeick/REF1790-NDS-Trainer-Toolkit repository on GitHub, at the commit this page was made from: the board is REF1790.kicad_pcb and its schematic REF1790.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).