Skip to the content
2 layers254 × 101.6 mmOrthog0n, the printed circuit board in 3D

The orthog0n is the last keyboard I'll probably design (for the forseeable future). The RGBKB Zen that I had been using for games for like 5 years bit the dust, so I decided to throw together something I had always…

Size
254 × 101.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
109
Nets
73
Pads
394
Tracks, vias
247, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
28 Dec 2023
Updated
28 Dec 2023

Overview

Orthog0n is an open-source printed circuit board by RSchneyer, from the RSchneyer/orthog0n repository on GitHub, published under the MIT licence. It is a 2-layer board of 254 × 101.6 mm with 109 parts on 73 nets, routed with 247 tracks and 0 vias.

Its parts include 51 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

orthog0n

orthog0n keyboard on grey deskmat

The orthog0n is the last keyboard I'll probably design (for the forseeable future). The RGBKB Zen that I had been using for games for like 5 years bit the dust, so I decided to throw together something I had always wanted to get around to making.

As usual, I take no responsibility for anything that doesn't work, or goes wrong when you try to build or use this board. Good luck!

Parts

109
QtyValueFootprintReferences
51D_SmallDiode_THT:D_DO-35_SOD27_P10.16mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D21, D22, D23, D24 +35
38MX-NoLEDButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBMX10, MX11, MX12, MX13, MX14, MX16, MX17, MX18, MX19, MX21, MX22, MX23, MX24, MX26, MX27, MX28 +22
11MX-NoLEDButton_Switch_Keyboard:SW_Cherry_MX_1.50u_PCBMX1, MX2, MX3, MX4, MX5, MX15, MX46, MX51, MX52, MX53, MX54
4, , ,
2MX-NoLEDButton_Switch_Keyboard:SW_Cherry_MX_2.00u_PCBMX25, MX38
1LOGOLOGOG***
1Pro_Microorthogon:pro_microU1

The 108 most common of 109 parts.

Similar boards

  • 2 layers208.8 × 393.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    109 parts1.3k
  • 2 layers89 × 100 mmHub16, the printed circuit board in 3D

    Hub16

    joshajohnson/Hub16

    A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

    109 parts388
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 2 layers77.4 × 128.5 mmOak, the printed circuit board in 3D

    Oak

    tpcarlson/synth-diy

    Mostly Eurorack projects

    109 parts107
  • 2 layers110 × 97.2 mmPcbBot, the printed circuit board in 3D

    PcbBot

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    109 parts94BSD-3-Clause
  • 2 layers126.5 × 103.6 mmInput, the printed circuit board in 3D

    Input

    jamessa/Pragmatic

    A modular split keyboard kit.

    109 parts73MIT
  • 2 layers55 × 100 mmESP32AY, the printed circuit board in 3D

    ESP32AY

    djspawnbrest/ESP32AY

    ZxPod - ESP32 based AY multiformat player

    109 parts59GPL-3.0
  • 2 layers70.5 × 128.3 mmAttenuator Offset II, the printed circuit board in 3D

    Attenuator Offset II

    Blinken-Lights/ASCII

    ASCII Modular hardware and software repo

    109 parts50MIT

Questions

How big is the Orthog0n PCB?

It measures 254 × 101.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Orthog0n use?

109 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Orthog0n KiCad files?

From the RSchneyer/orthog0n repository on GitHub, at the commit this page was made from: the board is orthog0n.kicad_pcb and its schematic orthog0n.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Orthog0n design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).