Skip to the content
2 layers30.5 × 30.5 mmTalky plant, the printed circuit board in 3D

kicad design for esp-8266 to plant sensor daughterboard

Size
30.5 × 30.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
11
Pads
29
Tracks, vias
18, 0
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
30 Apr 2016
Updated
30 Apr 2016

Overview

Talky plant is an open-source printed circuit board by RLuckom, from the RLuckom/talky-plant repository on GitHub. It is a 2-layer board of 30.5 × 30.5 mm with 15 parts on 11 nets, routed with 18 tracks and 0 vias.

It belongs with the sensors and measurement boards of this library.

README

readme.md

Talky-plant: a sensor connector for esp-8266 NodeMCU v3

Board files for my ongoing project to create internet-connected sensors. For the ESP8266 code, see extra sensory

This is a kicad project containing a board layout for a daughterboard to connect the NodeMCU v3 board to a DHT11 temperature / humidity sensor, a YL-69 soil moisture sensor, and a photoresistor to measure sunlight levels.

TODO:

  1. The resistor values listed in the schematic don't take into account either the voltage drop across the diodes or the values resistors actually come in. The resolution is way below what should be possible and I don't see the full range of adc values from either photoresistor or YL-69.

  2. Everything I've read suggests that soil moisture sensors are extremely short-lived devices. I have to characterize them better, and in the hardware design I should plan for having to switch out the fork part that goes in the soil.

Parts

15
QtyValueFootprintReferences
5CONN_01X01Pin_Headers:Pin_Header_Straight_1x01MCUA0, MCUD2, MCUD5, MCUD6, TPG1
2CONN_01X02Pin_Headers:Pin_Header_Straight_1x02PHR1, PWR1
2CONN_01X04Pin_Headers:Pin_Header_Straight_1x04DHC11, YL-69
2IN5817Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10D1, D2
110KResistors_ThroughHole:Resistor_Vertical_RM5mmDHC11_PUP1
110KResistors_ThroughHole:Resistor_Horizontal_RM10mmYL-69-R1
1200RResistors_ThroughHole:Resistor_Horizontal_RM10mmPHR_R1
15KResistors_ThroughHole:Resistor_Horizontal_RM10mmYL-69-R2

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Talky plant PCB?

It measures 30.5 × 30.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Talky plant use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Talky plant KiCad files?

From the RLuckom/talky-plant repository on GitHub, at the commit this page was made from: the board is talky-plant.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Talky plant design in my own project?

Its repository states no licence, so its author keeps all rights: ask RLuckom before reusing the design.