4 layers60 × 30 mm
DALI USB
SvenHaedrich/kicad_dali_usb_lpc
KiCad Project for DALI to USB interface based on NXP LPC 1114 µController.
47 parts3MIT
2 layers100 × 49 mm
SyntPiligrim
RK9AMX/SyntPilgrimHF frequency synthesizer 'Pilgrim'
- Size
- 100 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 93
- Pads
- 346
- Tracks, vias
- 702, 233
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Jul 2023
- Updated
- 13 Aug 2024
Overview
SyntPiligrim is an open-source printed circuit board by RK9AMX, from the RK9AMX/SyntPilgrim repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 49 mm with 116 parts on 93 nets, routed with 702 tracks and 233 vias.
It is built around the BAS70, US1M and BZX84C6V8, with the SI5351A-B-GT among its other parts. Its parts include 43 resistors, 39 capacitors, 2 inductors and 1 transistor. It belongs with the PIC boards of this library.
Main components
4
BAS70
SOT-23Schottky Diodeshongjiacheng
US1M
SMA-55℃~+150℃ 1 Independent 1.65V@1A 1A 1kV 30A 5uA@1kV 75ns SMA Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency DiodesBZX84C6V8
SOT-23-55℃~+150℃ 1 Independent 15Ω 2uA 300mW 6.4V~7.2V 6.8V 80Ω SOT-23 Zener Diodes ROHShongjiachengZener Diodes
SI5351A-B-GT
MSOP-10-40℃~+85℃ 1.71V~3.6V 200MHz 3 I2C MSOP-10 Clock Generators, PLLs, Frequency Synthesizers ROHSSilicon LabsClock Generators, PLLs, Frequency Synthesizers
README
README.mdHF frequency synthesizer 'Pilgrim'
Синтезатор ТПП "Пилигрим"
Разработка схемы и ПО: Oleg 9
Разработка печатной платы: RK9AMX
Обсуждение на форуме cqham.ru
Синтезатор выполнен на базе микросхемы Si5351 и микроконтроллера PIC16F1787 (PIC16F887), индикатор LCD 16x2.
Файл прошивки для PIC16F887 - 5351_PIC16F887_v07.hex
Для PIC16F1787 - 5351_PIC16F1787_v07X.hex. С делителем на 8 для валкодера 5351_PIC16F1787_v08X_vlc div 8.hex
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.01 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C20, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36 +3 |
| 17 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R10, R11, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R28 +1 |
| 10 | 0.1 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C7, C8, C10, C12, C15, C18, C19, C22, C23 |
| 7 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R29, R31, R33, R39.2, R40, R41 |
| 4 | 1.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30, R32, R34, R37 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R26, R27 |
| 3 | 10u/16V | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C6, C9, C17 |
| 3 | 220u/16V | Capacitor_SMD:CP_Elec_6.3x7.7 | C11, C14, C21 |
| 3 | 470k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R35 |
| 3 | BAS70 | Diode_SMD:D_SOD-323 | VD1, VD2, VD5 |
| 3 | LM317L_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | DA1, DA2, DA3 |
| 3 | Выход ВЧ | Connector_Coaxial:SMA_Wurth_60312002114503_Vertical | XP14, XP15, XP16 |
| 2 | 1000 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C16 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R25 |
| 2 | 470u/16V | Capacitor_SMD:CP_Elec_10x10 | C5.1, C5.2 |
| 2 | 47uH | Inductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L1, L2 |
| 2 | US1M | Diode_SMD:D_SMA | VD3, VD4 |
| 2 | c | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | XP8, XP13 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R38 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | R39 |
| 1 | 25MHz | Crystal:Crystal_HC49-4H_Vertical | Q1 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36 |
| 1 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39.1 |
| 1 | BZX84C6V8 | Package_TO_SOT_SMD:SOT-23 | VD6 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | XP9 |
| 1 | Encoder | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | XP1 |
| 1 | FT5HV 26MHz | Oscillator:Oscillator_SMD_Fox_FT5H_5.0x3.2mm | G1 |
| 1 | LCD 1602 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | XP3 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | DA4 |
| 1 | NC | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | PIC16F1787I/PT | Package_QFP:LQFP-44_10x10mm_P0.8mm | DD1 |
| 1 | PTT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | XP4 |
| 1 | Si5351A-B-GT | Package_SO:MSOP-10_3x3mm_P0.5mm | DD2 |
| 1 | Si5351a Module | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | XP6 |
| 1 | c | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | XP12 |
| 1 | c | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | XP11 |
| 1 | Вход КСВ-метра | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | XP10 |
| 1 | Клавиатура | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | XP2 |
| 1 | Питание | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | XP7 |
| 1 | Программатор | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | XP5 |
The 114 most common of 116 parts.
Similar boards
- 2 layers113 × 86.7 mm
SiC based Battery Disconnect
abhinav937/SiC-Based-Bi-Directional-Circuit-breaker
KiCad 7 PCB design files for E_Fuse
138 parts2 - 2 layers49 × 31 mm
LM5155-flyback
bartlettD/nixie-clock
A Nixie Tube based clock. Because everyone has to play with Nixies once, right?
33 parts1 - 6 layers150 × 160 mm
- 4 layers165 × 160 mm
- 2 layers30 × 50 mm
- 2 layers58.2 × 64 mm
- 2 layers80 × 30 mm
SS3-Power
diorcety/SS3
DIY Weller WMRP / WMRT / WXUP soldering station — transformer-based, MSPM0G1507 MCU, 4× dual N-MOSFET triac stage, 7-seg or 1.9" TFT display. Inspired by kair.us/projects/weller.
54 parts
Questions
How big is the SyntPiligrim PCB?
It measures 100 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SyntPiligrim use?
116 parts, built around the BAS70, US1M, BZX84C6V8 and SI5351A-B-GT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SyntPiligrim KiCad files?
From the RK9AMX/SyntPilgrim repository on GitHub, at the commit this page was made from: the board is SyntPiligrim.kicad_pcb and its schematic SyntPiligrim.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SyntPiligrim design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).