
Board esp32 v2
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

Reproduction of the Sega Nomad's main board, with added features including TMSS bypass jumpers, SMS and 32X support.
Venus Repro is an open-source printed circuit board by RGBeter, from the RGBeter/SegaNomad_MAIN_ReproductionPCB repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 175.8 × 60.5 mm with 101 parts on 263 nets, routed with 6,589 tracks and 434 vias.
Its parts include 31 capacitors, 27 resistors, 7 ICs, 3 connectors and 1 diode.
Reproduction of the Sega Nomad's main board, created from scans provided by Villahed94, Sega's documentation, and community knowledge of the FC1004 style Genesis. Additional features include TMSS bypass jumpers, SMS support and 32X support.

These PCBs are tested to work with with a stock VENUS SUB pcb, building these requires skills in microsoldering, QFP soldering, hot air rework, and Mega Drive troubleshooting. It is highly recomendded you start with a set of known working parts from a donor MegaDrive. VA1, VA1.8 and VA3 Model 2 Sega Genesis/MegaDrive can provide all of the necessary custom chips needed for this build. Support is not officially provided by neither RGBeter nor Villahed94 with building or debugging these PCBs.
While Sega utlized a 2 layer PCB for the Nomad, it is best to order these as a 4 layer PCB in order to improve noise across the board If you wish NOT to include the SRES bypass, add the following bodge wires in order to connect the original 315-5684 based SRES circuit.

Most of, if not all parts can be directly transplanted from a donor Nomad Main board, however, some alterations have been made, and they are as follows:
R5 + R6, FM DAC limiting resistors best changed to 0 ohms when modding audio
All large MLCC capacitors can have their value increased to 10uF to improve noise
| Component | Value | Note |
|---|---|---|
| IC1 | PLCC 68000 | CPU |
| IC2 | 68K RAM | WORK RAM |
| IC3 | FC1004/FF1004 | MAIN ASIC |
| IC4 | VIDEO RAM | VRAM |
| IC5 | QFP Z80 | Z80 CPU |
| IC6 | Z80 RAM | ZRAM |
| IC7 | LM809 | SRES BYPASS ONLY |
| C1 | 10uF | 1206 X7R |
| C2 | 10uF | 1206 X7R |
| C3 | 10uF | 1206 X7R |
| C4 | 47pF | 0603 C0G 315-5708 ONLY |
| C5 | 100pF | 0603 C0G |
| C6 | 100pF | 0603 C0G |
| C7 | 22pF | 0603 C0G |
| C8 | 1000pF | 0603 C0G |
| C9 | N/A | DOES NOT EXIST |
| C10 | 100pF | 0603 C0G |
| C11 | 100pF | 0603 C0G |
| C12 | 33pF | 0603 C0G |
| C13 | N/A | DOES NOT EXIST |
| C14 | 10uF | 1206 X7R |
| C15 | 10uF | 1206 X7R |
| C16 | 10uF | 1206 X7R |
| C17 | 10uF | 1206 X7R |
| C18 | 20pF | 0603 C0G |
| C19 | 47pF | 0603 C0G |
| C20 | 10uF | 1206 X7R |
| C21 | 33pF | 0603 C0G DO NOT POPULATE |
| C22 | 100pF | 0603 C0G |
| C23 | 33pF | 0603 C0G |
| C24 | 100pF | 0603 C0G |
| C25 | 0.1uF | 0603 X7R |
| C26 | 0.1uF | 0603 X7R |
| C27 | 0.1uF | 0603 X7R |
| C28 | N/A | DO NOT POPULATE |
| C29 | 100pF | 0603 C0G |
| C30 | 0.1uF | 0603 X7R |
| C31 | 0.047uF | 0603 X7R |
| C32 | N/A | DO NOT POPULATE |
| C33 | N/A | DOES NOT EXIST |
| C30 | 1uF | 0603 X7R SRES BYPASSS ONLY |
| CE1 | 47uF 6v | SMD ELEC, CAN REPLACE WITH TANTALUM |
| CE2 | 47uF 6v | SMD ELEC, CAN REPLACE WITH TANTALUM |
| CE3 | 100uF 6v | SMD ELEC, CAN REPLACE WITH TANTALUM |
| CE4 | 47uF 6v | SMD ELEC, CAN REPLACE WITH TANTALUM |
| D1 | SOD-923 DIODE | SRES BYPASS ONLY |
| OSC1 | MCLK OSCILATOR, SQUARE PACKAGE | CHECK REGION |
| R1 | 150R | 0603 |
| R2 | 220R | 0603 |
| R3 | 2.2K | 0603 |
| R4 | 220R | 0603 |
| R5 | 0R | 0603 DAC LIMITING RESISTOR |
| R6 | 0R | 0603 DAC LIMITING RESISTOR |
| R7 | 2.2K | 0603 |
| R8 | 4.7K | 0603 |
| R9 | 100R | 0603 |
| R10 | 100R | 0603 |
| R11 | 2.2K | 0603 |
| R12 | 2.2K | 0603 |
| R13 | 5.6K | 0603 |
| R14 | 5.6K | 0603 |
| R15 | 5.6K | 0603 |
| R16 | 4.7K | 0603 |
| R17 | 4.7K | 0603 |
| R18 | 4.7K | 0603 |
| R19 | 1.2K | 0603 |
| R20 | 1.2K | 0603 |
| R21 | 1.2K | 0603 |
| R22 | 4.7K | 0603 |
| R23 | 1.0K | 0603 |
| R24 | 330R | 0603 |
| R25 | 330R | 0603 |
| R26 | 2.2K | 0603 |
| R27 | 100K | 0603 |
| RA1 | 4.7K | 5X1206 BANK |
| RB1 | 2.2K | 4X0603 BANK |
| RB2 | 100R | 4X0603 BANK |
| RB3 | 100R | 4X0603 BANK |
| RB4 | 100R | 4X0603 BANK |
| RB5 | 100R | 4X0603 BANK |
| RB6 | 100R | 4X0603 BANK |
Oleg Endo: Found missing C31 and documented its value, provided EMI filter part numbers
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10u | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C14, C15, C16, C17, C20 |
| 7 | 100pF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C10, C11, C22, C24, C29 |
| 7 | STX222MB | SegaNomad:Venus_EMI | EM1, EM2, EM3, EM4, EM5, EM6, EM8 |
| 5 | 100 | Resistor_SMD:R_Array_Convex_4x0603 | RB2, RB3, RB4, RB5, RB6 |
| 5 | 2.2k | Resistor_SMD:R_0603_1608Metric | R3, R7, R11, R12, R26 |
| 5 | 4.7k | Resistor_SMD:R_0603_1608Metric | R8, R16, R17, R18, R22 |
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C25, C26, C27, C30 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 1.2k | Resistor_SMD:R_0603_1608Metric | R19, R20, R21 |
| 3 | 33pF | Capacitor_SMD:C_0603_1608Metric | C12, C21, C23 |
| 3 | 47u 6v | Capacitor_SMD:CP_Elec_5x4.5 | CE1, CE2, CE4 |
| 3 | 5.6k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP5, JP6, JP7 |
| 2 | 0/510 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R24, R25 |
| 2 | 33pF | Resistor_SMD:R_Array_Convex_4x1206 | CA1, CA2 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric | C28, C32 |
| 1 | 0.047u | Capacitor_SMD:C_0603_1608Metric | C31 |
| 1 | 1000pF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 100u 6v | Capacitor_SMD:CP_Elec_5x4.5 | CE3 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 2.2K | Resistor_SMD:R_Array_Convex_4x0603 | RB1 |
| 1 | 20pF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 22pF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 315-5700, 315-5660, 315-5708, 315-5487 | SegaNomad:LQFP-208_28x28mm_P0.5mm | IC3 |
| 1 | 4.7k | Resistor_SMD:R_Array_Convex_5x1206 | RA1 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 53.69313MHz | Oscillator:Oscillator_DIP-8 | OSC1 |
| 1 | C | Resistor_SMD:R_0603_1608Metric | C4 |
| 1 | Choke | SegaNomad:L_CommonModeChoke | EM9 |
| 1 | HS121 | Inductor_SMD:L_0603_1608Metric | FB3 |
| 1 | HS621 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LM809 | Package_TO_SOT_SMD:SOT-23 | IC7 |
| 1 | LMP6323 | SegaNomad:Venus_WRAM | IC2 |
| 1 | MC68000FN | SegaNomad:PLCC-68 | IC1 |
| 1 | MSM54C864 | SegaNomad:SOJ-40 | IC4 |
| 1 | NSR0130P2T5G | Diode_SMD:D_SOD-923 | D1 |
| 1 | PortB | Connector_Dsub:DSUB-9_Pins_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm | CN2 |
| 1 | STB271KB | SegaNomad:Venus_EMI | EM7 |
| 1 | Z80_QFP | SegaNomad:LQFP-44_Z80_10x10mm_P0.8mm | IC5 |
| 1 | uPD4364CX-15 | Package_SO:SOIC-28W_7.5x18.7mm_P1.27mm | IC6 |
| 1 | ~ | SegaNomad:Venus_Cartidge_Slot | CN1 |
| 1 | ~ | SegaNomad:Venus_FFC | CN3 |

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.




cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.

aeberbach/A1200KB
As of right now this is revision 4. I know it could be improved very, very slightly by changing the position of key groups by less than a millimetre but I think it's complete now.

profdc9/ModularTuner
A Modular Antenna Tuner for a Phased Array Antenna System

ceoloide/corney-island
An Ergogen-based, autogenerated version of foostan's crkbd (Corne) split keyboard
It measures 175.8 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
101 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RGBeter/SegaNomad_MAIN_ReproductionPCB repository on GitHub, at the commit this page was made from: the board is Venus_Repro.kicad_pcb and its schematic Venus_Repro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).