
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

(In progress) Arduino dcs-ios for custom made a10 ufc for dcs
Ufc is an open-source printed circuit board by Pytness, from the Pytness/a10-ufc-bios repository on GitHub. It is a 2-layer board of 241 × 48 mm with 36 parts on 39 nets.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | SW_MEC_5E | Button_Switch_THT:SW_PUSH_6mm | SW0, SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22 +19 |
The 35 most common of 36 parts.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 241 × 48 mm and has 2 copper layers, 1.6 mm thick.
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pytness/a10-ufc-bios repository on GitHub, at the commit this page was made from: the board is ufc/ufc.kicad_pcb and its schematic ufc/ufc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Pytness before reusing the design.