2 layers100.9 × 97.8 mm
2 layers79.3 × 30 mm
StartUP Board
Purdue-Solar/artermis27-startup-pcbincludes FNR, keyswitch, and estop
- Size
- 79.3 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 20
- Pads
- 101
- Tracks, vias
- 133, 227
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Jul 2025
- Updated
- 29 Aug 2026
Overview
StartUP Board is an open-source printed circuit board by Purdue-Solar, from the Purdue-Solar/artermis27-startup-pcb repository on GitHub. It is a 2-layer board of 79.3 × 30 mm with 43 parts on 20 nets, routed with 133 tracks and 227 vias.
It is built around the ANT13SECQE. Its parts include 14 resistors, 7 diodes, 6 capacitors, 5 connectors and 4 transistors.
Main components
1README
README.mdPSR Startup Board - Artemis 2027
The purpose of this board is to activate the power distro board and indicate to the power distro board which mode of operation the car should be in. There is also a forward neutral reverse switch, which goes to the steering wheel.
The FNR switch has three states, and each line is pulled high using an internal pullup resistor in the power distro board microcontroller. This means that the logic is inverted (if a line is driven low, it is activated).
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 680 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R14, R15 |
| 6 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D8, D9 |
| 5 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R16 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric | R17, R18, R19 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 3 | NMOS | Package_TO_SOT_SMD:TSOT-23 | Q2, Q3, Q4 |
| 2 | 1 uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | Conn_01x05_Socket | Connector_Molex:Molex_Micro-Fit_3.0_43650-0500_1x05_P3.00mm_Horizontal | J1, J2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 436500204 | 1x2molex:CONN_SD-43650-002_02_MOL | J5 |
| 1 | ANT13SECQE | ANT13SEC_CRS:ANT13SEC_CRS | U1 |
| 1 | AP7380-33W5-7 | AP7380-33W5-7:AP7380-33W5-7 | IC1 |
| 1 | D_Zener | Diode_SMD:D_0805_2012Metric | D10 |
| 1 | PMOS | Package_TO_SOT_SMD:TSOT-23 | Q1 |
| 1 | ~ | Connector_Molex:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J3 |
| 1 | ~ | Connector_Molex:Molex_Mega-Fit_76825-0002_2x01_P5.70mm_Horizontal | J4 |
Similar boards
- 2 layers111 × 61 mm
- 2 layers52.2 × 52.2 mm
Base
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
43 parts3kApache-2.0 - 2 layers146.1 × 49.5 mm
Breakout 121pin 368255-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
43 parts1.2k - 2 layers33 × 34 mm
- 2 layers96.1 × 78.6 mm
EYEBROW WARNING INDICATOR RIGHT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
43 parts431 - 2 layers42.9 × 19 mm
- 2 layers99.1 × 99.7 mm
RC6502 Prototyping
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
43 parts193GPL-3.0
Questions
How big is the StartUP Board PCB?
It measures 79.3 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StartUP Board use?
43 parts, built around the ANT13SECQE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StartUP Board KiCad files?
From the Purdue-Solar/artermis27-startup-pcb repository on GitHub, at the commit this page was made from: the board is _restore_backup_2026-08-29T17-27-28-939/StartUP Board.kicad_pcb and its schematic StartUP Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the StartUP Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Purdue-Solar before reusing the design.