
ESP32 SmartGlass
jobitjoseph/ESP32-AI-SmartGlass
The ESP32 AI Smartglass is an innovative wearable device that blends the power of artificial intelligence with the convenience of home automation.

It is a small, 3D printable rhasspy satellite. It uses INMP441 microphone, MAX98357A audio amplifier paired with 8 Ohm 0.5 W broadband speaker, NeoPixel led strip and ESP32. It is powered from 5V USB.
HomeAssistantSpeaker is an open-source printed circuit board by ProrokWielki, from the ProrokWielki/HomeAssistantSpeaker repository on GitHub. It is a 2-layer board of 53.3 × 39.7 mm with 33 parts on 44 nets, routed with 209 tracks and 17 vias.
It is built around the ESP32-WROOM-32, MAX98357AETE+T and LM1117-3.3, with the INMP441ACEZ-R7 among its other parts. Its parts include 12 capacitors, 7 resistors, 4 connectors and 3 ICs. It belongs with the audio and music boards and the ESP32 boards of this library.
It is a small, 3D printable rhasspy satellite. It uses INMP441 microphone, MAX98357A audio amplifier paired with 8 Ohm 0.5 W broadband speaker, NeoPixel led strip and ESP32. It is powered from 5V USB.
Running Rhasspy instance
To build it you will need:
And most important Soldering skills



| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C7 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R5 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C4, C6, C8 |
| 2 | 20uH | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | 220p | Capacitor_SMD:C_0805_2012Metric | C10, C11 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | INMP441ACEZ | INMP441:INMP441ACEZ | MK1 |
| 1 | LED | Connector_Harwin:Harwin_M20-89003xx_1x03_P2.54mm_Horizontal | J4 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MAX98357AETE+ | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U3 |
| 1 | Prog | Connector_Harwin:Harwin_M20-89003xx_1x03_P2.54mm_Horizontal | J3 |
| 1 | Program | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | Reset | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0 | USB-C:TYPE-C-31-M-17_handsolder | J1 |
The 31 most common of 33 parts.

jobitjoseph/ESP32-AI-SmartGlass
The ESP32 AI Smartglass is an innovative wearable device that blends the power of artificial intelligence with the convenience of home automation.

LighthouseXy/VoxConductor
VoxConductor — ESP32-S3 desktop intelligent voice hub with LVGL, ASR, DeepSeek, streaming TTS, weather and microSD logging

skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/

daguilar43/proyectoEmbebidos
Aquí pueden encontrarse todos los archivos del proyecto Amiplanta realizado para la materia Sistemas Embebidos durante el semestre 2022-2 en la Universidad Nacional de Colombia.


Aggie-del/AIXA-AI-Healthcare-Chatbot
AIXA is an AI-powered healthcare chatbot designed to provide users with accessible, fast, and easy-to-understand health information through a mobile or web application.

ollieelliot/ESP32-IoT-Board
Challenging myself to make a tiny IoT device. Currently 22.8 mm in diameter, ~45 components, 2.4 Ghz chip antenna, microphone, temperature sensor, ESP32-C3 and LiPo charger circuit.

VasilKalchev/PXLstick
Board for driving WS281x lights with ESP32 running Aircoookie's WLED firmware
It measures 53.3 × 39.7 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the ESP32-WROOM-32, MAX98357AETE+T, LM1117-3.3 and INMP441ACEZ-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ProrokWielki/HomeAssistantSpeaker repository on GitHub, at the commit this page was made from: the board is Hardware/HomeAssistantSpeaker.kicad_pcb and its schematic Hardware/HomeAssistantSpeaker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ProrokWielki before reusing the design.