2 layers47 × 47 mm Z Brake, the printed circuit board in 3D

Z Brake

Reference and fab files for the Project R3D Z Brake Board

Size: 47 × 47 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 28
Nets: 19
Pads: 68
Tracks, vias: 136, 2
Pours: 2
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 4 Aug 2022
Updated: 31 Oct 2021

Overview

Z Brake is an open-source printed circuit board by Project-R3D, from the Project-R3D/Z-Brake-Board repository on GitHub. It is a 2-layer board of 47 × 47 mm with 28 parts on 19 nets, routed with 136 tracks and 2 vias.

It is built around the EC2-24NU. Its parts include 7 resistors, 5 diodes, 3 connectors, 2 switches and 1 capacitor.

Main components

EC2-24NU
DIP,15x7.5mm-40℃~+85℃ 1ms 2.88kΩ 200mW 220V@DC、250V@AC 24V 2A 2ms 300mA@110VDC、500mA@125VAC、2A@30VDC 75mΩ Silver Alloy Two groups of conversions: 2C(Double-pole double-throw conversion) DIP,15x7.5mm Signal Relays ROHSKEMETSignal Relays

README

README.md

Lulzbot Z Motor Automatic Brake

The original design files contained within this repository were backed up from http://devel.lulzbot.com/electronics/dolores/ on Sept 8, 2021. In case that gets taken down as well, please see this archive.org backup as well.

This repository acts as a backup to that original design (which was sadly removed from all other Lulzbot servers) while complying with the original CC BY SA 4.0 AND GPL v3 license.

Project files

Show this board on your page

https://pcbkit.io/boards/Project-R3D/Z-Brake-Board/Z_Brake/Z_Brake.kicad_pcb

The board's own page, for a message or a post.

Source

Repository: Project-R3D/Z-Brake-Board
Board file: Z_Brake/Z_Brake.kicad_pcb
Commit: 1215015
Licence: Not stated
Copies: 2 copies in 2 repositories

Parts

Qty	Value	Footprint	References
4	10k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R2, R3, R5, R6
4	CONN_01X01	MountingHole:MountingHole_2.5mm_Pad	MH1, MH2, MH3, MH4
2	CONN_01X04	Molex:Molex-70543-0038-0-0-MFG	P1, P3
2	D_Schottky_ALT	Diode_SMD:D_SOD-123	D2, D3
2	EC2-24NU	ec2:EC2_Relay	K1, K2
2	M2012C390	Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	RV1, RV2
1	0.22uF	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C1
1	10.0 V ZENER	Diode_SMD:D_SMA_Handsoldering	D1
1	12.4k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R1
1	180k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R4
1	2N7002	Package_TO_SOT_SMD:SOT-23_Handsoldering	Q1
1	3.3k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R7
1	CONN_01X02	Molex:MOLEX_0705430001	P2
1	D_ALT	Diode_SMD:D_SMA_Handsoldering	D5
1	LED	LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder	D4
1	LM397	Package_TO_SOT_SMD:SOT-23-5_HandSoldering	U1

The 26 most common of 28 parts.

Similar boards

2 layers82.6 × 40.1 mm
Aux relays
thewonderidiot/cdu
Tools for reverse-engineering, simulating, and interfacing with the Coupling Data Unit (CDU), one of Apollo's most infamous boxes
44 parts1MIT
2 layers44.5 × 72.7 mm
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
28 parts2.1k
2 layers95 × 54 mm
EinkPDA screen
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
28 parts2kApache-2.0
2 layers137.2 × 41.5 mm
Breakout 64pin 176122-6-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
28 parts1.2k
2 layers45 × 45 mm
Smartbuttons
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
28 parts915
2 layers24.1 × 36.2 mm
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
28 parts911GPL-3.0
2 layers34.8 × 12.2 mm
Infnoise goldfingers
waywardgeek/infnoise
The world's easiest TRNG to get right
28 parts854CC0-1.0
2 layers55.9 × 99.1 mm
Stm32f0 disco Luos shield
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
28 parts546MIT

Questions

How big is the Z Brake PCB?

It measures 47 × 47 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Z Brake use?

28 parts, built around the EC2-24NU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Z Brake KiCad files?

From the Project-R3D/Z-Brake-Board repository on GitHub, at the commit this page was made from: the board is Z_Brake/Z_Brake.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Z Brake design in my own project?

Its repository states no licence, so its author keeps all rights: ask Project-R3D before reusing the design.