4 layers45 × 32 mm
Templog mainboard
Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.
68 parts457MIT
2 layers50.8 × 22.9 mm
Feather ESP32S3
ProfFan/MagicLoc-S3-HW1ESP32-S3 based wireless research platform
- Size
- 50.8 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.61 mm
- Parts
- 40
- Nets
- 71
- Pads
- 227
- Tracks, vias
- 408, 142
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jan 2024
- Updated
- 23 Jan 2024
Overview
Feather ESP32S3 is an open-source printed circuit board by ProfFan, from the ProfFan/MagicLoc-S3-HW repository on GitHub. It is a 2-layer board of 50.8 × 22.9 mm with 40 parts on 71 nets, routed with 408 tracks and 142 vias.
It is built around the ESP32-S3-MINI-1-N8. Its parts include 10 capacitors, 8 resistors, 4 ICs, 3 connectors and 2 inductors. It belongs with the microcontroller boards boards and the ESP32 boards of this library.
Main components
1README
README.mdMagicLoc ESP32-S3 Node Hardware
LICENSE
CERN OHL-W v2, See LICENSE
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP4, TP5, TP6, TP7 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C8, C9 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4, R7 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C6, C7 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 100k 1% | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10uF 10V | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1uH 800mA | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 2.2uH 800mA 25mOhm | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 4.7uF 10V | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 450k 1% | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 750 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | BAT+ | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | ESP32-S3-MINI-1 | Espressif:ESP32-S3-MINI-1 | U1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | LSM6DSOTR | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y_JLC | U2 |
| 1 | SGM41511 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-3000P | SW1 |
| 1 | TLV62569DDC | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | U262-16XN-4BVC11 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | feather long | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J1 |
| 1 | feather short | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
The 36 most common of 40 parts.
Similar boards
- 4 layers106.6 × 205.2 mm
SparkFun Thing Plus ESP32-S3 panelized
Valar-Systems/MiniSpeedCam
MiniSpeedCam
1,652 parts116CERN-OHL-S-2.0 - 4 layers68.6 × 53.3 mm
Arduino UNO R4 WiFi
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
262 parts95WTFPL - 4 layers285.1 × 48.1 mm
Ayab esp32
AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield
246 parts50CC-BY-SA-4.0 - 2 layers55 × 55 mm
LeafNode v3.1
leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.
91 parts47 - 2 layers52.8 × 55 mm
ILDAWaveX16
stanleyondrus/ILDAWaveX16
ILDAWaveX16 is an open-source, high-resolution, wireless laser DAC with SD-card playback, network control, and ILDA output.
95 parts42 - 4 layers100 × 75 mm
Freedo radio
CappyT/freedo
Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on
135 parts33Apache-2.0 - 2 layers79 × 30 mm
LIA
JGAguado/LIA
Low-power pet tracking platform built around Meshtastic and LoRa mesh networking
81 parts29
Questions
How big is the Feather ESP32S3 PCB?
It measures 50.8 × 22.9 mm and has 2 copper layers, 1.61 mm thick.
What parts does the Feather ESP32S3 use?
40 parts, built around the ESP32-S3-MINI-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Feather ESP32S3 KiCad files?
From the ProfFan/MagicLoc-S3-HW repository on GitHub, at the commit this page was made from: the board is Feather_ESP32S3.kicad_pcb and its schematic ESP_BMS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Feather ESP32S3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ProfFan before reusing the design.