2 layers130.8 × 134.4 mm
MyFirstBuck
ManveerA/Buck_Converter_PCB
Repository for Buck Converter PCB design project for ELEC-4450 Power Electronics.
50 parts1
2 layers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 34
- Pads
- 94
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2024
- Updated
- 3 Jan 2025
Overview
KeyPad PCB is an open-source printed circuit board by PrintBot-Studio, from the PrintBot-Studio/3D-Printed-Arduino-based-Keypad repository on GitHub. It is a 2-layer board with 21 parts on 34 nets.
It is built around the US2AA. Its parts include 10 diodes, 10 switches and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdProject 1: F16 Viper Throttle and Keypad
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.00u | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10 |
| 10 | US2AA | ScottoKeebs_Components:Resistor_0805 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 1 | Arduino_Pro_Micro | ScottoKeebs_MCU:Arduino_Pro_Micro | U1 |
Similar boards
- 2 layers130.8 × 147.6 mm
- 2 layers143.5 × 129.5 mm
- 6 layers50.8 × 50.8 mm
- 2 layers48.1 × 24.8 mm
- 2 layers68 × 91.5 mm
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k
Questions
What parts does the KeyPad PCB use?
21 parts, built around the US2AA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KeyPad PCB KiCad files?
From the PrintBot-Studio/3D-Printed-Arduino-based-Keypad repository on GitHub, at the commit this page was made from: the board is PCB Design/KeyPad PCB/KeyPad PCB.kicad_pcb and its schematic PCB Design/KeyPad PCB/KeyPad PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KeyPad PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask PrintBot-Studio before reusing the design.