
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Easier way to give breadboard powersupply
P supply is an open-source printed circuit board by PrinceYadav78, from the PrinceYadav78/Breadboard-PW repository on GitHub, published under the MIT licence. It is a 2-layer board of 30.1 × 52.1 mm with 15 parts on 9 nets, routed with 109 tracks and 0 vias.
Its parts include 6 diodes, 3 connectors, 2 capacitors, 2 resistors and 1 IC. It belongs with the power boards of this library.
A compact breadboard power supply module designed to provide a stable and safe regulated voltage for electronics prototyping and learning.
This project is a small PCB that plugs directly into standard breadboard power rails and converts an external DC input into a regulated output suitable for powering simple circuits.
Breadboards are commonly used for learning and prototyping, but powering them safely is often inconvenient or unreliable. I built this project to create a simple, beginner-friendly power solution while learning schematic design, component selection, and PCB layout.
Power is supplied through a barrel jack and first passes through reverse polarity protection to prevent damage from incorrect connections. Filtering capacitors smooth the input before a linear voltage regulator provides a stable output. LEDs indicate power status, and headers connect directly to the breadboard rails.
Through this project I learned how physical constraints like breadboard spacing affect PCB design, why component placement matters for stability, and how datasheets guide decisions for regulators, capacitors, and protection components.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4007 | Diode_SMD:D_2010_5025Metric | D1, D2, D3, D4 |
| 2 | 560 | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | Conn_02x02_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_1210_3225Metric | D5, D6 |
| 1 | 470uF | Capacitor_SMD:C_1812_4532Metric | C2 |
| 1 | 47uF | Capacitor_SMD:C_1812_4532Metric | C1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | LM7805_TO220 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

It measures 30.1 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PrinceYadav78/Breadboard-PW repository on GitHub, at the commit this page was made from: the board is PCB/P_supply.kicad_pcb and its schematic PCB/P_supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).