2 layers56 × 56 mm
Pps watch
idlehandsdev/pps-watch
An extremely accurate watch that doesn't tell time.
39 parts42AGPL-3.0
2 layers30.1 × 17.2 mm
PKS GPS
PriX-Y/PKS-GPSI made becuse i need gps in my GPS to my project but i dont wanna put this in BIG Project there is not anntena becuse for now i dont need.
- Size
- 30.1 × 17.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 16
- Pads
- 48
- Tracks, vias
- 131, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Mar 2026
- Updated
- 1 Apr 2026
Overview
PKS GPS is an open-source printed circuit board by PriX-Y, from the PriX-Y/PKS-GPS repository on GitHub. It is a 2-layer board of 30.1 × 17.2 mm with 14 parts on 16 nets, routed with 131 tracks and 9 vias.
It is built around the MAX-M10S. Its parts include 5 resistors, 4 connectors, 3 capacitors, 1 IC and 1 diode. It belongs with the radio and wireless boards of this library.
Main components
1README
README.mdPKS-GPS
GPS module with custome PCB and Case
I made becuse i need gps in my GPS to my project but i dont wanna put this in BIG Project there is not anntena becuse for now i dont need. I made this i track road and speed for that moment i no need code for it
there is visual in a case:
and closed
im not use screaw becuse its small ( 30mm ) and i use hot glue to close that
Parts
** Is base on uBLOK MAX-M10S gps mcu its cheap but very good **
** i give to it 2.54mm pin conector becuse i need something to connect i think its a little to big for this project but work , work **
** red diod what i have for free from my arduino **
** capacitors and resistors is smd yeah but in 805 case and i wanna teach how to sold smd becuse is harder then tht **
this connector for connector its cheap and good :)
that all parts
Programs
kicad(pcb)
google dosc (bom)
there is BOM
Parts from kicad:
Parts to buy BOM
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 1 | 01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | J4 |
| 1 | 01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J3 |
| 1 | 01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J1 |
| 1 | 100 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | Conn_Coaxial | Connector_Coaxial:MMCX_Molex_73415-0961_Horizontal_1.6mm-PCB | J2 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MAX-M10S | RF_GPS:ublox_MAX | U1 |
Similar boards
- 4 layers42 × 83.9 mm
StratoSoar MK2.2
crnicholson/StratoSoar-MK2
StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.
116 parts24 - 4 layers79.8 × 47.2 mm
- 4 layers64 × 60 mm
Dronemagnav
ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.
60 parts11 - 10 layers160 × 100 mm
Cirradio devboard
mangobanaani/cirradio
Tactical UHF FHSS mesh radio: Zynq-7045 + AD9361, SystemVerilog RTL, C++20 comms stack, AES-256 PKCS#11 crypto
316 parts8MIT - 2 layers225 × 63.5 mm
- 4 layers47 × 45 mm
- 4 layers50 × 100 mm
Questions
How big is the PKS GPS PCB?
It measures 30.1 × 17.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PKS GPS use?
14 parts, built around the MAX-M10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PKS GPS KiCad files?
From the PriX-Y/PKS-GPS repository on GitHub, at the commit this page was made from: the board is GPS - KICAD/PKS-GPS.kicad_pcb and its schematic GPS - KICAD/PKS-GPS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PKS GPS design in my own project?
Its repository states no licence, so its author keeps all rights: ask PriX-Y before reusing the design.