

Prototype
- Size
- 95 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 48
- Pads
- 286
- Tracks, vias
- 290, 28
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Jun 2024
- Updated
- 1 Jul 2024
Overview
Prototype is an open-source printed circuit board by PorridgePi, from the PorridgePi/soccer-pcbs repository on GitHub. It is a 2-layer board of 95 × 95 mm with 102 parts on 48 nets, routed with 290 tracks and 28 vias.
It is built around the TEMT6000X01. Its parts include 19 connectors, 4 resistors, 2 ICs, 1 diode and 1 inductor. It belongs with the RP2040 boards of this library.
Main components
1Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | Mouse Hole | PorridgePi-Personal:Small Hole | M1, M10, M11, M13, M14, M15, M16, M17, M18, M19, M20, M21, M22, M23, M24, M25 +21 |
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 4 | MountingHole-M3-5.6 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H5, H6, H7, H8 |
| 4 | MountingHole-M3-6.4 | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | XT30 | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J10, J11, J12, J13 |
| 3 | G*** | kibuzzard-663088A5 | kibuzzard-663088A5, kibuzzard-663088A5, kibuzzard-663088A5 |
| 3 | JST_XH_4P | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J14, J15, J19 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J3, J4 |
| 2 | G*** | kibuzzard-6630897E | kibuzzard-6630897E, kibuzzard-6630897E |
| 2 | G*** | kibuzzard-6630893A | kibuzzard-6630893A, kibuzzard-6630893A |
| 2 | G*** | kibuzzard-66308915 | kibuzzard-66308915, kibuzzard-66308915 |
| 2 | G*** | kibuzzard-6630888F | kibuzzard-6630888F, kibuzzard-6630888F |
| 2 | JST_XH_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8, J9 |
| 2 | R | PCM_Resistor_THT_AKL:R_Box_L8.4mm_W2.5mm_P5.08mm | R2, R3 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP9, JP10 |
| 2 | XT60 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1, J2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | BT_UART | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J18 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | G*** | kibuzzard-66308801 | kibuzzard-66308801 |
| 1 | G*** | kibuzzard-6630881A | kibuzzard-6630881A |
| 1 | G*** | kibuzzard-66309001 | kibuzzard-66309001 |
| 1 | G*** | kibuzzard-66308831 | kibuzzard-66308831 |
| 1 | G*** | kibuzzard-66308953 | kibuzzard-66308953 |
| 1 | G*** | kibuzzard-66309013 | kibuzzard-66309013 |
| 1 | G*** | kibuzzard-6630900F | kibuzzard-6630900F |
| 1 | IMU_JST_XH_4P | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J17 |
| 1 | JST_XH_3P | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | LED | Third-Party:LED-6028 | D1 |
| 1 | Raspberry-Pi-Pico | PorridgePi-Personal:Raspberry-Pi-Pico | U1 |
| 1 | Switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J16 |
| 1 | SwitchHole-M8 | MountingHole:MountingHole_8.4mm_M8_Pad | H9 |
| 1 | TEMT6000 | PorridgePi-Personal:TEMT6000-SMD | R1 |
| 1 | TF-Luna | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | L1 |
| 1 | TF-Mini-Plus | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | TM1 |
| 1 | ~ | PorridgePi-Personal:MINI560 | U2 |
More from PorridgePi/soccer-pcbs
8- 2 layers148 × 166.8 mm

- 2 layers148 × 168 mm

- 2 layers170 × 147 mm

- 2 layers148 × 146.7 mm

- 2 layers152.1 × 141.9 mm

- 2 layers100 × 80 mm

- 2 layers148 × 168 mm

- 2 layers39 × 42 mm

Similar boards
- 2 layers27.5 × 32 mm

- 2 layers90 × 55 mm

- 2 layers57.5 × 72 mm

ESP32-Based Sensor PCB
blazjerman/ESP32-Based-Sensor-PCB
For updates or additional library formats, visit SnapEDA.
77 parts4MIT - 2 layers50.8 × 81.3 mm

Burrboard
drogue-iot/burrboard
This repository contains prototyping boards for RH summit, aka burrboards, firmware running on the burrboard feathers, and the software around it
34 parts3Apache-2.0 - 4 layers60.6 × 72.3 mm

ESP32
KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.
90 parts2 - 4 layers60 × 33.5 mm

Home weather station esp32
Norbixix/home-weather-station-esp32
ESP32-based low-power home weather station PCB project
49 parts2 - 4 layers89 × 54.5 mm

- 4 layers101.3 × 50.5 mm

ESP32 sensor board
Ankithkumarsingh/ESP32-custom-sensor-board
This PCB contains the power supply unit, ESP32 module as compute, microphone sensor, light sensing sensor, SDCard module for data logging.
94 parts1
Questions
How big is the Prototype PCB?
It measures 95 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Prototype use?
102 parts, built around the TEMT6000X01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Prototype KiCad files?
From the PorridgePi/soccer-pcbs repository on GitHub, at the commit this page was made from: the board is internationals/pcbs/prototype/prototype.kicad_pcb and its schematic internationals/pcbs/bottom/bottom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Prototype design in my own project?
Its repository states no licence, so its author keeps all rights: ask PorridgePi before reusing the design.