
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

This is a complete rework of the RPiUSB, an alternative to the Bash Bunny, based on a Raspberry Pi Zero (2w compatible). Ducky Script compatible and modular, the goal is to make the idea even better !
RPiUSBv2 is an open-source printed circuit board by Pooky-s, from the Pooky-s/RPiUSBv2 repository on GitHub, published under the Unlicense licence. It is a 2-layer board with 28 parts on 67 nets.
Its parts include 10 connectors, 9 resistors, 2 capacitors, 1 IC and 1 diode.
This is a complete rework of the RPiUSB, an alternative to the Bash Bunny, based on a Raspberry Pi Zero (2w compatible). Ducky Script compatible and modular, the goal is to make the idea even better !
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7, R8, R9 |
| 4 | Pogo pin | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | J2, J3, J4, J10 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | H2, H3, H4 |
| 2 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Header RPi | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J8, J9 |
| 1 | 2N3904 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | LED Status | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LM66200DRLR | RPiUSBv2-Mainboard:SOTFL50P160X60-8N | IC1 |
| 1 | Micro_SD_Card | RPiUSBv2-Mainboard:TF01A | J7 |
| 1 | MountingHole_Pads | MountingHole:MountingHole_2.7mm_M2.5_Pad | H1 |
| 1 | Pogo pin USB + | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | J5 |
| 1 | Pogo pin USB- | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | J6 |
| 1 | USB_A | RPiUSBv2-Mainboard:MOLEX_48037-0001 | J1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pooky-s/RPiUSBv2 repository on GitHub, at the commit this page was made from: the board is main_board/main_board.kicad_pcb and its schematic main_board/main_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).