

Dispenser pcb rev01
- Size
- 150.5 × 85.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 92
- Pads
- 198
- Tracks, vias
- 63, 0
- Pours
- 29
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 May 2018
- Updated
- 25 Jun 2018
Overview
Dispenser pcb rev01 is an open-source printed circuit board by Platytude, from the Platytude/dispenser_pcb repository on GitHub. It is a 2-layer board of 150.5 × 85.7 mm with 36 parts on 92 nets, routed with 63 tracks and 0 vias.
It is built around the ATMEGA328P-PU, LM2576SX-5.0 and A4988, with the B560C-13-F-MS and PA4309.104NLT among its other parts. Its parts include 13 connectors, 11 capacitors, 6 ICs, 4 resistors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM2576SX-5.0
TO-263-5-40℃~+125℃@(TJ) 1 3A 4V~40V 52kHz 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersA4988
UncategorisedALLEGROB560C-13-F-MS
SMC-65℃~+125℃ 1 Independent 175A 500uA@60V 5A 60V 850mV@5A SMC Schottky Diodes ROHSMSKSEMISchottky DiodesPA4309.104NLT
SMD,12.8x12.8mm±20% SMD,12.8x12.8mm Power Inductors ROHSPulse ElecPower Inductors
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C5, C6, C7, C9, C11 |
| 5 | CONN_01X04 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | P2, P3, P5, P6, P7 |
| 4 | CONN_01X01 | Mounting_Holes:MountingHole_2-5mm | P8, P9, P10, P11 |
| 2 | 10.0K | Resistors_SMD:R_0805_HandSoldering | R1, R4 |
| 2 | 5ZLH100MEFC6.3X11 | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C8, C10 |
| 2 | A4988 | USER_MODULES:A4988 | U1, U2 |
| 1 | 0 | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 1300pF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 39pF | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | AD8293G80 | USER_TRANSISTORS_SMD:AD8293G80_SOT23-8 | U3 |
| 1 | ATMEGA328P-P | digikey-footprints:28-DIP | IC1 |
| 1 | B560C-13-F | Diodes_SMD:SMC_Standard | D1 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | CONN_01X03 | Connectors_JST:JST_XH_S03B-XH-A_03x2.50mm_Angled | P4 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | P12 |
| 1 | DNP | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | LM2576SX | TO_SOT_Packages_SMD:TO-263-5Lead | U5 |
| 1 | PA4309.104NLT | USER_INDUCTORS:PA4309.104NLT | L1 |
| 1 | RPI_GPIO_HEADER | USER_MODULES:RASBERRY_PI_HEADER_WBOARD | P1 |
| 1 | TXB0104PWR | digikey-footprints:14-TSSOP | U4 |
Similar boards
- 4 layers190 × 70 mm

- 6 layers199.4 × 169 mm

- 2 layers63.3 × 42.7 mm

- 4 layers100 × 50 mm

USB Hub
Phil-CIA/Development-Station-Power-Supply
3 channel bench supply with current and voltage plotting
82 parts - 6 layers80.9 × 63 mm

- 2 layers65 × 56 mm

PiGarage
bryce-builds/PiGarage
Open-source Raspberry Pi power management and audio HAT for automotive head-unit use
79 parts9 - 2 layers115 × 100 mm

Cog1
diegodemarco/cog1
cog1 is an open-source industrial IoT gateway (hardware and software) built as a motherboard hosting an Orange Pi Zero 3 Linux SBC.
133 parts6MIT - 4 layers108 × 74 mm

STM32 Drone
bassammorsy/stm32-flight-controller
Custom 4-layer STM32F405RGTx quadcopter flight controller PCB designed in KiCad. Betaflight compatible, 4S–6S LiPo input, SMT assembled by JLCPCB.
104 parts3MIT
Questions
How big is the Dispenser pcb rev01 PCB?
It measures 150.5 × 85.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dispenser pcb rev01 use?
36 parts, built around the ATMEGA328P-PU, LM2576SX-5.0, A4988 and B560C-13-F-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dispenser pcb rev01 KiCad files?
From the Platytude/dispenser_pcb repository on GitHub, at the commit this page was made from: the board is dispenser_pcb_kicad/dispenser_pcb_rev01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dispenser pcb rev01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Platytude before reusing the design.