
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
The StreamPad is an open source hackpad made for macros (designed for streaming).
Hackpad1 is an open-source printed circuit board by Pixeleyesd, from the Pixeleyesd/StreamPad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 82.6 × 99.7 mm with 33 parts on 30 nets, routed with 266 tracks and 0 vias.
Its parts include 16 diodes, 16 switches and 1 IC.
The StreamPad is an open source hackpad made for macros (designed for streaming). It has 16 keys (4x4) and an OLED screen.
![]()
Designed with KiCad.
![]()
Designed with fusion 360.
The macropad is assembled by pressing heat-set inserts into the back of the top plate. Then, 16mm screws are inserted through the bottom of the base and the PCB, threading directly into the inserts to hold everything together.
![]()
The firmware is written in KMK.
You will need to flash the .uf2 provided in the Firmware folder in this repo to the Seeeduino XIAO. (Refer to help here: https://wiki.seeedstudio.com/XIAO-RP2040-with-CircuitPython/)
After this, drag the files in the circuitpy folder provided in this repo into the CIRCUITPY drive that shows up after flashing circuitpython to the microcontroller. Do this as you would a flash drive.
Bill Of Materials (BOM):
1x XIAO RP2040
16x Cherry MX Switches
16x DSA Keycaps
4x M3x5x4 Heatset inserts
4x M3x16mm screws
16x 1N4148 DO-35 Diodes
1x 0.91" 128x32 OLED Display
My 3D printed case (Top & Bottom)
My PCB design. (I'm planning to use JLCPCB for the custom assembly of it)
You will also need to solder wires from XIAO to OLED. The wires will be self-provided:
GND -> GND
3v3 -> VCC
D4 -> SDA
D5 -> SCL
You will then need to attach the OLED onto the top half of the case.
This was my first time ever using KiCad for PCB design, and my first time properly shipping an open source project like this. I learned a lot about this sort of stuff with this project, and made many mistakes I will remember not to make again lol. Thanks to the Hackclub (and Stardance) team for providing these amazing resources that helped make this dream of mine come true :3
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 1 | MOUDLE-SEEEDUINO-XIAO | footprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 82.6 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pixeleyesd/StreamPad repository on GitHub, at the commit this page was made from: the board is PCB/hackpad1.kicad_pcb and its schematic PCB/hackpad1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).