
Concertina-3-1
PierreBanwarth/MIDI-Concertina
Version 3.0 of the accordion mechanical keyboards

Version 3.0 of the accordion mechanical keyboards
Concertina v2.1 is an open-source printed circuit board by PierreBanwarth, from the PierreBanwarth/MIDI-Concertina repository on GitHub. It is a 2-layer board of 134.6 × 92.7 mm with 29 parts on 31 nets, routed with 81 tracks and 0 vias.
It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
This version is an old version of Accordion Mechanical Keyboards.
You can check actual repo You can check the Devblog (in french)
Or check this repo Old readme here
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | KEYSW | Button_Switch_Keyboard:SW_Cherry_MX1A_1.00u_Plate | K?1, K1, K2, K3, K4, K5, K6, K7, K8, K9, K10, K11, K12, K13, K14, K15 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
The 18 most common of 29 parts.

PierreBanwarth/MIDI-Concertina
Version 3.0 of the accordion mechanical keyboards


gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 134.6 × 92.7 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PierreBanwarth/MIDI-Concertina repository on GitHub, at the commit this page was made from: the board is kicad-files/concertina/concertina-v2.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PierreBanwarth before reusing the design.