Skip to the content
2 layers154.9 × 76.2 mmFishTank2, the printed circuit board in 3D

PCBs and models for my reef-pi controller

Size
154.9 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
60
Pads
162
Tracks, vias
382, 16
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
3 Jul 2023
Updated
3 Jul 2023

Overview

FishTank2 is an open-source printed circuit board by PerilousApricot, from the PerilousApricot/FishTank2 repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 154.9 × 76.2 mm with 44 parts on 60 nets, routed with 382 tracks and 16 vias.

It is built around the R40-11D2-5/6. Its parts include 9 resistors, 5 diodes, 5 connectors and 2 transistors.

Main components

1

README

README.md

FishController

PCBs and models for my reef-pi controller

Parts

44
QtyValueFootprintReferences
8Screw_Terminal_01x02TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm12v_In1, GPIO22, GPIO23, GPIO24, GPIO25, Pump1, Pump2, Shutoff1
5Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3v3_1, J3v3_2, J5v1, J12V_Always1, J12V1
310kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R4, R6
34.7kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR5, R7, R8
3Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalI2C_1, I2C_2, I2C_Ph1
3LEDLED_THT:LED_D1.8mm_W3.3mm_H2.4mmD3, D4, D5
3Screw_Terminal_01x03TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mmTemp_1, Temp_2, Temp_3
21N4007Diode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD1, D2
21kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2, R3
2Q_NPN_BCEPackage_TO_SOT_THT:TO-92Q1, Q2
2R40-11D2-5/6Library:Relay_DPDT_NTE_NRP04RL1, RL2
1330Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR9
1Conn_01x07_PinConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalSPI1
1Conn_02x12_Top_BottomConnector_PinSocket_2.54mm:PinSocket_2x07_P2.54mm_VerticalGPIO_Out1
1Raspberry_Pi_2_3Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalPiGPIO1

The 40 most common of 44 parts.

Similar boards

  • 2 layers78 × 60 mmIce viz, the printed circuit board in 3D

    Ice viz

    muni-works/vcad

    BRep CAD kernel in Rust/WASM

    44 parts442Apache-2.0
  • 2 layers115 × 14.5 mmUFC Function Select, the printed circuit board in 3D

    UFC Function Select

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    44 parts431
  • 2 layers37.7 × 20 mmCandleLight, the printed circuit board in 3D

    CandleLight

    HubertD/candleLight

    stm32f0 usb can adapter (KiCAD)

    44 parts400
  • 2 layers88.9 × 88.4 mmTeensypi v91, the printed circuit board in 3D

    Teensypi v91

    simondlevy/Hackflight

    Minimalist flight-control toolkit for makers

    44 parts334GPL-3.0
  • 2 layers125 × 98 mm3-in-1, the printed circuit board in 3D

    3-in-1

    mudmin/AnotherMaker

    This is where I will store code snippets for AnotherMaker Videos

    44 parts258
  • 2 layers65 × 56.5 mmRPiG3iMac, the printed circuit board in 3D

    RPiG3iMac

    qbancoffee/imac_g3_ivad_board_init

    iMac G3 IVAD board initialization with an arduino

    44 parts240LGPL-3.0
  • 2 layers54.4 × 49.3 mmFx3 tn20k adapter, the printed circuit board in 3D

    Fx3 tn20k adapter

    Stefan-Olt/MISRC

    MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.

    44 parts236CC-BY-4.0
  • 2 layers250 × 32 mmPsu, the printed circuit board in 3D

    Psu

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    44 parts222

Questions

How big is the FishTank2 PCB?

It measures 154.9 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FishTank2 use?

44 parts, built around the R40-11D2-5/6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FishTank2 KiCad files?

From the PerilousApricot/FishTank2 repository on GitHub, at the commit this page was made from: the board is FishTank2.kicad_pcb and its schematic FishTank2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FishTank2 design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).