
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

My Splen Macropad is small keyboard that can be use for everyday uses. My Splen macropad has two columns, three rows, OLED display, and seven buttons. I use an app called Kicad to sketch and design my macropad.
MyHackpad is an open-source printed circuit board by Peaceout4728, from the Peaceout4728/splenmacropad repository on GitHub. It is a 2-layer board of 65 × 75.5 mm with 16 parts on 21 nets, routed with 139 tracks and 2 vias.
Its parts include 7 diodes, 7 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards of this library.
My Splen Macropad is small keyboard that can be use for everyday uses. My Splen macropad has two columns, three rows, OLED display, and seven buttons. I use an app called Kicad to sketch and design my macropad. In kicad, I use the Schematic editor to create a layout of where I wanted my switches and diodes to go, then I went to pcb editor to arrange the switches and diodes to my liking. I went to Fusion to create 3D version of Macropad in its case. The components I added was diodes, switches, rotary encoder-switch, Moudle-SeedUnio-Xiao Rp2040.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7 |
| 6 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW2, SW4, SW5, SW6, SW7, SW8 |
| 1 | Conn_01x04_Pin | Hackpadfootprints:SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 1 | MOUDLE-SEEEDUINO-XIAO | Hackpadfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | RotaryEncoder_Switch | Hackpadfootprints:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 65 × 75.5 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Peaceout4728/splenmacropad repository on GitHub, at the commit this page was made from: the board is pcb/MyHackpad.kicad_pcb and its schematic pcb/MyHackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Peaceout4728 before reusing the design.