Skip to the content
2 layers50 × 61 mmESP32 Falcon, the printed circuit board in 3D

This is custom ESP32 board with the IMU BMI270.

Size
50 × 61 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
58
Pads
180
Tracks, vias
438, 96
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 Mar 2026
Updated
2 Apr 2026

Overview

ESP32 Falcon is an open-source printed circuit board by Patkra77111, from the Patkra77111/ESP32_Falcon repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 50 × 61 mm with 28 parts on 58 nets, routed with 438 tracks and 96 vias.

It is built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and BMI270, with the USBLC6-2SC6 and BLM21PG221SH1 among its other parts. Its parts include 9 resistors, 5 capacitors, 4 ICs, 3 connectors and 2 diodes. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

ESP32_Falcon

Jest to customowa płytka deweloperska oparta na module ESP32-S3, była ona inspirowana designem STM32 Nucleo. Jest to projekt rekrutacyjny do koła naukowego FALCON na Politechnice Wrocławskiej. Został on całkowicie wykonany w KiCad.

Specyfikacja

Mikrokontroler: ESP32-S3-WROOM-1.

  • Komunikacja i Zasilanie: Złącze USB-C z układem zabezpieczającym ESD.
  • Czujniki: Zintegrowany czujnik IMU BMI270 podłączony przez I2C.
  • Rozszerzalność: Wyprowadzenia sygnałowe na złączach goldpin w układzie Nucleo.

1. Schemat

schemat

2. Layout PCB

PCB

3. Model 3D

3D

Główne Decyzje Projektowe i Zasady EMC

  1. Prowadzenie sygnałów USB (D+/D-): Linie danych z USB-C zostały poprowadzone jako para różnicowa na jednej warstwie, bez użycia przelotek, w celu zachowania spójności impedancji.
  2. Zachowanie strefy Keepout dla anteny: Moduł ESP32-S3 został umieszczony na krawędzi płytki, a jego antena znajduje się całkowicie poza obrysem miedzi i laminatu, aby uniknąć tłumienia sygnału.
  3. Dystrybucja Zasilania i Decoupling: Ścieżki zasilające mają odpowiednią grubość (0.4mm - 0.5mm) i są prowadzone bezpośrednio do głównych odbiorników. Kondensatory filtrujące zostały umieszczone w bezpośrednim sąsiedztwie pinów zasilających ESP32 oraz BMI270.
  4. Wylewki GND (Copper Pours): Wylewki masy na obu stronach laminatu. Połacie masy zostały połączone za pomocą przelotek.

Parts

28
QtyValueFootprintReferences
310kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R6, R9
3SW_PushButton_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mmBOOT1, EN1, USER_BUTTON1
20.1uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C3
21kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R5
222uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2_tantalum, C3_tantalum
24.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R8
25k1Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2Conn_01x15_PinConnector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ2, J3
2LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2
11AFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF2
11uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1BLM21PG221Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolderFB2
1BMI270footprints:BMI270_BOSU4
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11J1

Similar boards

  • 2 layers150 × 101 mmSmart scale, the printed circuit board in 3D

    Smart scale

    wngxp/smart-scale

    Work-in-progress ESP32-S3 smart food scale with custom PCB, enclosure CAD, firmware, mobile app, and backend.

    97 parts
  • 4 layers120 × 80 mmBrain, the printed circuit board in 3D

    Brain

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    113 parts
  • 4 layers69 × 81 mmSharpCONSOLE, the printed circuit board in 3D

    SharpCONSOLE

    lastlxrd/Pogopo

    Open-source modular ESP32-S3 handheld console featuring custom hardware, a Sharp Memory LCD, pogopoOS, emulation, motion controls, audio, haptics, and expandable modules.

    196 parts2Apache-2.0
  • 2 layers50 × 56 mmESP, the printed circuit board in 3D

    ESP

    vadymtaranenko/ESP32-S3-DevBoard

    Custom development board oparta na ESP32-S3 z wbudowanym czujnikiem IMU

    59 parts
  • 4 layers99 × 70 mmRowOne, the printed circuit board in 3D

    RowOne

    Zoomwag/Vantis-X

    A UAB

    71 parts
  • 4 layers58 × 58.8 mmCanbus, the printed circuit board in 3D

    Canbus

    iot49/leaves-kicad

    47 parts
  • 2 layers40 × 40 mmSubira, the printed circuit board in 3D

    Subira

    rodneyosodo/subira

    54 partsMIT
  • 2 layers60.5 × 51.5 mmTIGER Ver 0.2, the printed circuit board in 3D

    TIGER Ver 0.2

    zzZzz-io/TIGER_PCB_Files

    53 parts

Questions

How big is the ESP32 Falcon PCB?

It measures 50 × 61 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32 Falcon use?

28 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3, BMI270 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32 Falcon KiCad files?

From the Patkra77111/ESP32_Falcon repository on GitHub, at the commit this page was made from: the board is ESP32_Falcon.kicad_pcb and its schematic ESP32_Falcon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32 Falcon design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).