Skip to the content
4 layers21 × 76.6 mmDashboard leds, the printed circuit board in 3D

Dashboard LED panel

Size
21 × 76.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
48
Nets
57
Pads
149
Tracks, vias
527, 84
Pours
7
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Apr 2024
Updated
12 Jan 2025

Overview

Dashboard leds is an open-source printed circuit board by PUT-Motorsport, from the PUT-Motorsport/PUTM_EV_DASHBOARD_LEDS repository on GitHub. It is a 4-layer board of 21 × 76.6 mm with 48 parts on 57 nets, routed with 527 tracks and 84 vias.

It is built around the BSS138. Its parts include 25 resistors, 5 capacitors, 5 diodes, 5 transistors and 3 connectors.

Main components

1

README

README.md

Dashboard LEDs

This project contains design for the dashboard LED panel. It includes the following components:

  • LEDs PCB,
  • Connector PCB (to connect the LEDs PCB to the dashboard).

Parts

48
QtyValueFootprintReferences
1010kResistor_SMD:R_0603_1608MetricR1, R2, R3, R8, R10, R12, R14, R16, R24, R25
5100RResistor_SMD:R_0603_1608MetricR7, R9, R11, R13, R15
51kResistor_SMD:R_0603_1608MetricR4, R5, R6, R22, R23
51uCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5
5BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5
4150Resistor_SMD:R_1206_3216MetricR17, R18, R19, R21
2200 mAFuse:Fuse_1206_3216MetricF1, F2
2RedLED_SMD:LED_PLCC-2_3.4x3.0mm_AKD1, D2
2YellowLED_SMD:LED_PLCC-2_3.4x3.0mm_AKD3, D5
1100Resistor_SMD:R_1206_3216MetricR20
1Conn_01x06Connector_Wire:SolderWire-0.15sqmm_1x06_P4mm_D0.5mm_OD1.5mm_ReliefJ2
1Expansion ConnectorConnector_PinSocket_1.27mm:PinSocket_2x20_P1.27mm_Vertical_SMDJ3
1GreenLED_SMD:LED_PLCC-2_3.4x3.0mm_AKD4
1HarnessLocal_Library:Molex_53261-0471J1
1LOGOLocal_Library:PUTM_Logo_5mmG***

The 46 most common of 48 parts.

More from PUT-Motorsport/PUTM_EV_DASHBOARD_LEDS

1
  • 2 layers32 × 27 mmDashboard connector, the printed circuit board in 3D

    Dashboard connector

    PUT-Motorsport/PUTM_EV_DASHBOARD_LEDS

    Dashboard LED panel

    3 parts

Similar boards

  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers21.6 × 52.3 mmPs2 pico hat, the printed circuit board in 3D

    Ps2 pico hat

    No0ne/ps2x2pico

    USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

    17 parts399MIT
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 4 layers74 × 104 mmBeepy, the printed circuit board in 3D

    Beepy

    sqfmi/beepy-hardware

    Beepy Hardware

    160 parts348MIT

Questions

How big is the Dashboard leds PCB?

It measures 21 × 76.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Dashboard leds use?

48 parts, built around the BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dashboard leds KiCad files?

From the PUT-Motorsport/PUTM_EV_DASHBOARD_LEDS repository on GitHub, at the commit this page was made from: the board is leds/dashboard_leds.kicad_pcb and its schematic connector/dashboard_connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dashboard leds design in my own project?

Its repository states no licence, so its author keeps all rights: ask PUT-Motorsport before reusing the design.