Skip to the content
4 layers60 × 150 mmPUTM EV BMS HV MASTER 2023, the printed circuit board in 3D

PUTM EV BMS HV MASTER 2023

PUT-Motorsport/PUTM_EV_AMS_MASTER

High Voltage Battery Management System

Size
60 × 150 mm
Copper layers
4
Thickness
1.6 mm
Parts
253
Nets
236
Pads
979
Tracks, vias
1,663, 490
Pours
32
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Oct 2022
Updated
26 Oct 2026

Overview

PUTM EV BMS HV MASTER 2023 is an open-source printed circuit board by PUT-Motorsport, from the PUT-Motorsport/PUTM_EV_AMS_MASTER repository on GitHub. It is a 4-layer board of 60 × 150 mm with 253 parts on 236 nets, routed with 1,663 tracks and 490 vias.

It is built around the LTC6820IMS#PBF, MCP2542FD-E/MF and UCC12040DVE, with the REF193GSZ-REEL, SN74LVC1G07DBVR and USBLC6-2SC6 among its other parts. Its parts include 73 resistors, 68 capacitors, 22 ICs, 21 diodes and 13 transistors. It belongs with the power boards of this library.

Main components

12

README

README.md

PUTM_EV_BMS_HV_MASTER_2023

Accumulator Managment System (High Voltage Battery Managment System)

Overview

The AMS system consists of two main parts, the master and multiple slaves.

The apparatus is responsible for the managment of the battery as a whole, determining it's states like: state of charge or unsafe state plausibility. It also supervises the turning on and off of the hv bus.

Master

The AMS Master is the center of the whole system it's responsible for most of the tasks: current measurement, high voltage relay control, slave control, high voltage measurement and communication with the car.

Software

The AMS system havely relies on RTOS (Real Time Operating System) for seperating and managing different tasks. The system is divided mainly into three parts:

  • main task - responsible for control over the whole system,
  • subsidiary tasks - for off handling time consuming calculations or interfacing,
  • communication tasks - for handling communication with external systems like CAN communication with the car or isoSPI for communication with the slaves.

Hardware

The AMS is powered by STM32G484xx, a powerful, new gen MCU capable of handling varius communication interfaces and tasks. On board there are also three 24bit ADC ICs responsible for taking precise measurments of flowing current and voltage present on HV bus. For interfacing with other components the AMS uses M80 and M300 series Harwin connectors which offer high reliability. The board also features other logic components all on a custom 4 layer board.

The research and development work was carried out was a part of the Student Scientific Clubs Create Innovations (SKNTI) program. Ministry of Science and Higher Education

baner-sknti

Parts

253
QtyValueFootprintReferences
32100nFCapacitor_SMD:C_0603_1608MetricC15, C16, C24, C25, C27, C28, C29, C33, C38, C39, C40, C42, C43, C46, C47, C49 +16
2510kResistor_SMD:R_0603_1608MetricR4, R11, R13, R14, R17, R19, R22, R23, R36, R37, R42, R43, R50, R51, R54, R55 +9
10100RResistor_SMD:R_0603_1608MetricR16, R18, R48, R49, R52, R53, R56, R57, R60, R66
101kResistor_SMD:R_0603_1608MetricR1, R2, R3, R5, R6, R15, R44, R45, R46, R47
910uFCapacitor_SMD:C_0603_1608MetricC23, C41, C44, C51, C54, C55, C62, C65, C66
9CDBU0530Diode_SMD:D_0603_1608MetricD5, D6, D17, D18, D19, D20, D21, D22, D23
82.7kResistor_SMD:R_0603_1608MetricR20, R21, R34, R35, R62, R63, R70, R71
72SK3065Package_TO_SOT_SMD:SOT-89-3Q6, Q7, Q8, Q9, Q10, Q11, Q12
7GZ1608D601TFInductor_SMD:L_0603_1608MetricFB1, FB2, FB3, FB4, FB5, FB6, FB7
61mHInductor_SMD:L_1206_3216MetricL5, L6, L8, L9, L11, L12
433RResistor_SMD:R_0603_1608MetricR32, R33, R38, R39
44.7uHInductor_SMD:L_1206_3216MetricL1, L3, L7, L10
4FOD8802DR2_IMGOpto 2 ch:SOIC127P600X175-8NO1, O2, O3, O4
4SML-D12U1WT86LED_SMD:LED_0603_1608MetricD1, D2, D3, D8
4VSSB410S-E3/52TDiode_SMD:D_SMBD9, D10, D15, D24
30ZCH0050FF2GFuse:Fuse_1210_3225MetricF1, F3, F4
32N7002Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3
3M3MountingHole:MountingHole_3.2mm_M3H1, H2, H4
3REF193GSZ-REELMCP1501-10E_SN:SOIC127P600X175-8NIC5, IC10, IC16
3STN4NF06LPackage_TO_SOT_SMD:SOT-223-3_TabPin2Q4, Q5, Q13
2100nFCapacitor_SMD:C_0805_2012MetricC32, C37
2100nF/60VCapacitor_SMD:C_0603_1608MetricC17, C26
210uF/60VCapacitor_SMD:C_1210_3225MetricC9, C10
2120RResistor_SMD:R_0603_1608MetricR40, R41
21uFCapacitor_SMD:C_0603_1608MetricC13, C14
2200RResistor_SMD:R_0603_1608MetricR68, R69
220pFCapacitor_SMD:C_0603_1608MetricC1, C2
222nFCapacitor_SMD:C_0603_1608MetricC34, C35
225pFCapacitor_SMD:C_0603_1608MetricC3, C4
24.7uFCapacitor_SMD:C_0603_1608MetricC48, C59
247uFCapacitor_SMD:C_0603_1608MetricC30, C31
25.1kResistor_SMD:R_0603_1608MetricR7, R8
2AP7365-33YRG-13AP7365-33YRG-13:AP736533YRG13IC9, IC15
2CDMM20M0F2500CDMM:CDMMRD1, RD2
2ISO6763FDWRPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmIC8, IC14
2LTC6820IMSPackage_SO:MSOP-16_3x4.039mm_P0.5mmU9, U10
2M300-MV10345M1M300-MV10345M1:M300MV10345M1J8, J9
2MCP2542FD-E/MFPackage_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mmU6, U8
2MCP3561T-E_NCMCP3561T-E_NC:QFN40P300X300X60-21N-DIC11, IC17
2SMBJ26CA-13-FDiode_SMD:D_SMBD11, D16
2SN74LVC1G07DBVRPackage_TO_SOT_SMD:SOT-23-5IC6, IC12
2TSZU52C13Diode_SMD:D_0603_1608MetricD12, D13
2UCC12040DVEPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmIC7, IC13
2USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U5, U7
110.5kResistor_SMD:R_0603_1608MetricR27
1100kResistor_SMD:R_0603_1608MetricR10
1100uF/12VCapacitor_SMD:CP_Elec_5x4.5C18
1105kResistor_SMD:R_0603_1608MetricR30
110pFCapacitor_SMD:C_0603_1608MetricC11
110uHInductor_SMD:L_Coilcraft_XAL5050-XXXL4
112nFCapacitor_SMD:C_0603_1608MetricC12
1147kResistor_SMD:R_0603_1608MetricR26
11MResistor_SMD:R_0603_1608MetricR12
11nFCapacitor_SMD:C_0603_1608MetricC45
12.2uFCapacitor_SMD:C_0603_1608MetricC22
12.2uF/60VCapacitor_SMD:C_1210_3225MetricC20
120.5kResistor_SMD:R_0603_1608MetricR24
123.2kResistor_SMD:R_0603_1608MetricR31
133RResistor_SMD:R_Array_Convex_8x0602RN1
133uHInductor_SMD:L_Bourns_SRP1038C_10.0x10.0mmL2
1392kResistor_SMD:R_0603_1608MetricR25
14.7RResistor_SMD:R_0603_1608MetricR29
140.2kResistor_SMD:R_0603_1608MetricR28
147uF/12VCapacitor_SMD:CP_Elec_5x4.5C19
15.6nFCapacitor_SMD:C_0603_1608MetricC21
15.6nF/2000VSamacsys:C2824C36
1576-2920L500/24SLDRSamacsys:2920L700SLPRF2
16-1419128-46-1419128-4:614191284K1
174AUP1G32Package_TO_SOT_SMD:SOT-23-5_HandSolderingU3
174LVC1G86Package_TO_SOT_SMD:SOT-23-5_HandSolderingU2
1DLW21SN501SK2LSamacsys:DLW21SN121HQ2LFL1
1FTSH-107-01-L-DV-K-Aftsh-107-01-l-dv-k-a:FTSH-107-XX-YYY-DV-K-AJ4
1HM1193NLTransformer_SMD:Transformer_Pulse_H1100NLT1
1LM1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1M3MountingHole:MountingHole_3.2mm_M3_Pad_ViaH3
1M300-MV30645M1M300-MV30645M1:M300MV30645M1J1
1M80-5100442Samacsys:M80-51004YYJ3
1M80-5100622Samacsys:M80-51006YYJ7
1M80-5101422Samacsys:M80-51014YYJ5
1M80-5103422Samacsys:M80-51034YYJ2

The 242 most common of 253 parts.

Similar boards

  • 2 layers36.6 × 18.8 mmMchck, the printed circuit board in 3D

    Mchck

    mchck/mchck-board

    MC HCK board schematic and layout

    41 parts27
  • 2 layers55 × 53 mmHeatgun, the printed circuit board in 3D

    Heatgun

    m24h/heatgun

    A small hot air station for soldering, using type-858 heat gun as handle, STC8G1k17 as MCU, copper wire resistor for cold junction compensation

    40 parts3Apache-2.0
  • 4 layers97 × 78 mmPUTM EV Frontbox 2023, the printed circuit board in 3D

    PUTM EV Frontbox 2023

    PUT-Motorsport/PUTM_EV_FRONTBOX

    PCB board aquiring data from the front side of the vehicle

    322 partsMIT
  • 2 layers58.4 × 20 mmInverter Connector, the printed circuit board in 3D

    Inverter Connector

    PUT-Motorsport/PUTM_EV_INVERTER_CONNECTOR

    7 parts
  • 4 layers190.8 × 12.1 mmWARBL2 5.1, the printed circuit board in 3D

    WARBL2 5.1

    amowry/WARBL2

    WARBL2 Code and design files

    94 parts33GPL-3.0
  • 2 layers98.6 × 39 mmGWR pcb, the printed circuit board in 3D

    GWR pcb

    juicykinklabs/TongueTyper

    A talking-gag that acts as a game controller, posture trainer, speaker, and more.

    68 parts1GPL-3.0
  • 4 layers80 × 49 mmPIB, the printed circuit board in 3D

    PIB

    apexsat/payload-electrical

    PCBs for payload

    319 parts1
  • 2 layers412.7 × 77.5 mmSlave Board, the printed circuit board in 3D

    Slave Board

    columbia-fsae/2021_Accumulator_Electronics

    This repository contains all the PCBs embedded inside the accumulator container of Columbia University's 2021 Formula SAE electric racecar. They were designed in KiCAD by Sabin Zarrandikoetxea and Bert Steyaert.

    150 parts1

Questions

How big is the PUTM EV BMS HV MASTER 2023 PCB?

It measures 60 × 150 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PUTM EV BMS HV MASTER 2023 use?

253 parts, built around the LTC6820IMS#PBF, MCP2542FD-E/MF, UCC12040DVE and REF193GSZ-REEL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PUTM EV BMS HV MASTER 2023 KiCad files?

From the PUT-Motorsport/PUTM_EV_AMS_MASTER repository on GitHub, at the commit this page was made from: the board is hardware/PUTM_EV_BMS_HV_MASTER_2023.kicad_pcb and its schematic hardware/Communication.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PUTM EV BMS HV MASTER 2023 design in my own project?

Its repository states no licence, so its author keeps all rights: ask PUT-Motorsport before reusing the design.