2 layers65 × 56 mm
2 layers100 × 100 mm
Pv test station
PSenfft/pv_test_station- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 45
- Pads
- 110
- Tracks, vias
- 127, 44
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Jul 2024
- Updated
- 20 Jan 2025
Overview
Pv test station is an open-source printed circuit board by PSenfft, from the PSenfft/pv_test_station repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 23 parts on 45 nets, routed with 127 tracks and 44 vias.
Its parts include 9 connectors, 5 resistors, 2 ICs, 2 fuses and 1 capacitor.
README
README.mdpv_test_station
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | nc | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 2 | Fuse | Fuse:Fuseholder_Clip-6.3x32mm_Littelfuse_102_Inline_P34.21x7.62mm_D2.54mm_Horizontal | F1, F2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2N7002 | digikey-footprints:SOT-23-3 | Q1 |
| 1 | 8,33k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | AZ576-1A-12DE | SamacSys_Parts:AZ5761A12DE | K1 |
| 1 | Adafruit_Feather_M0_RFM9x_LoRa_Radio | Module:Adafruit_Feather_M0_RFM | A1 |
| 1 | Bat in | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | CT426-HSN830DR | SamacSys_Parts:SOIC127P600X172-8N | IC1 |
| 1 | D | digikey-footprints:DIODE_BAR6303WE6327HTSA1_INF | D1 |
| 1 | FRAM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | GPS | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J9 |
| 1 | PV-In | digikey-footprints:PHOENIX_1017521 | J1 |
| 1 | PV-Out | digikey-footprints:PHOENIX_1017521 | J2 |
| 1 | Temp1 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | Temp2 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | load | digikey-footprints:PHOENIX_1017521 | J3 |
| 1 | qwiic | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | ~ | digikey-footprints:DCDC | U1 |
Similar boards
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the Pv test station PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pv test station use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pv test station KiCad files?
From the PSenfft/pv_test_station repository on GitHub, at the commit this page was made from: the board is pcb/pv_test_station/pv_test_station.kicad_pcb and its schematic pcb/pv_test_station/pv_test_station.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pv test station design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).