
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Yet Another Motion Sensor - Uses an ESP01 and a cheap PIR motion sensor, sends activation events via MQTT, optimized for very low power use.
YAMS - Yet Another Motion Sensor is an open-source printed circuit board by PProvost, from the PProvost/YAMS-ESP01 repository on GitHub. It is a 2-layer board of 34.3 × 51.4 mm with 10 parts on 8 nets, routed with 51 tracks and 0 vias.
Its parts include 3 capacitors, 2 resistors, 2 ICs and 2 connectors. It belongs with the sensors and measurement boards and the ESP8266 boards of this library.
Yet Another Motion Sensor - Uses an ESP01 and a cheap PIR motion sensor, sends activation events via MQTT, optimized for very low power use. Runs on 3 AA batteries (I use Panasonic Eneloop NiMh cells).
/config.json with the following contents: { "reset_settings": true }. This file is included in the
/data directory in this repo.Credits: This circuit used in this design is based on the work described in Benny de Leeuw's article.
IMPORTANT!: This is a 3.3V circuit. The HC-SR501 PIR sensor is 5V, so you either need to maintain two power voltages or modify the PIR to run on 3.3V.
The circuit is designed to be battery powered, requiring between 3.7V and 6V due to the requirements of the MCP1700 LDO. This requires some special with your PIR sensor. Most of the cheap ones you will find expect 5V. See below for more information about modding your PIR sensor for 3V3.
Once I've built a few and ironed out the bugs, I will provide STLs for a case and a link to the PCB on OSHPark.
Please refer to the schematic PDF and the other files in the schematic/ folder.
I wanted to reuse the VCC pin on the PIR sensor to make mounting easier, but also to power the PIR sensor with the same 3.3VDC the ESP takes. For some of my sensors, I made the following modifications successfully:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C3 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 3K3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | ESP-01v090 | ESP8266:ESP-01 | U1 |
| 1 | MCP1700-3302E_TO92 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | PIR_Motion_Sensor | Sensors:PIR_Motion_Sensor_Horiz | PIR1 |
| 1 | Power | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | TTL-Serial | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 34.3 × 51.4 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PProvost/YAMS-ESP01 repository on GitHub, at the commit this page was made from: the board is kicad/YAMS - Yet Another Motion Sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PProvost before reusing the design.