
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

ECE Capstone Avalanche Transmitter
Avalanche transmitter is an open-source printed circuit board by PNevins971, from the PNevins971/TeamAvalanche repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 55 × 110 mm with 31 parts on 39 nets, routed with 164 tracks and 14 vias.
It is built around the 74HC00D. Its parts include 10 resistors, 2 ICs, 1 capacitor, 1 transistor and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R_Small | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 2 | PinHeader_1x01_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | Battery In (6V), GND |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 74HC00 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | ANT_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | AE1 |
| 1 | C | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1 |
| 1 | C_Variable | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | CV1 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | GREEN_LED | LED_THT:LED_D5.0mm | TRANSMITTING |
| 1 | RED_LED | LED_THT:LED_D5.0mm | 75% |
| 1 | RED_LED_100 | LED_THT:LED_D5.0mm | 25% |
| 1 | RED_LED_25 | LED_THT:LED_D5.0mm | 100% |
| 1 | RED_LED_75 | LED_THT:LED_D5.0mm | 50% |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | On/Off |
| 1 | ~ | ta:pro_mini | U2 |
The 26 most common of 31 parts.

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed


Kris-Sekula/EPROM-EMU-NG
EPROM Emulator Project with Arduino


tebl/BE6502-Build-a-65c02-computer
A PCB being made while watching Ben Eaters "Build a 6502 computer" video series. Includes the computer itself, a standalone slow clock and an Arduino Mega shield for the bus monitor sketch..

slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

It measures 55 × 110 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the 74HC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PNevins971/TeamAvalanche repository on GitHub, at the commit this page was made from: the board is PCB_design/avalanche_transmitter.kicad_pcb and its schematic PCB_design/avalanche_transmitter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).