

Esp32 board
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 56
- Pads
- 78
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 May 2025
- Updated
- 10 Sep 2025
Overview
Esp32 board is an open-source printed circuit board by OysteinFalkeid, from the OysteinFalkeid/scatebot repository on GitHub. It is a 2-layer board with 6 parts on 56 nets.
It is built around the ESP32-DEVKITC-VE and TXS0108EPW. Its parts include 4 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
2ESP32-DEVKITC-VE
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesTXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
README
README.mdscatebot
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x06_Socket | Connector_Wire:SolderWire-0.75sqmm_1x06_P4.8mm_D1.25mm_OD2.3mm | J1, J2, J3 |
| 1 | Conn_01x02_Socket | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J4 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U2 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
Similar boards
- 2 layers205.7 × 137.2 mm

- 2 layers132 × 162 mm

- 4 layers68.6 × 53.3 mm

Icezum
FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board
218 parts357GPL-3.0 - 2 layers94.5 × 74.4 mm

Ax58100-stm32-ethercat
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
184 parts93 - 4 layers80 × 100 mm

Baseboard
NVIDIA-AI-IOT/my-jetson-nano-baseboard
An open source Jetson Nano baseboard and tools to design your own.
240 parts91 - 4 layers80 × 73.8 mm

ESP32-Bit Pirate Dock
AndreiVladescu/ESP32-Bit-Pirate-Hardware
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.
49 parts85CERN-OHL-W-2.0 - 4 layers42.8 × 36.8 mm

- 2 layers81.3 × 30.9 mm

ISABlaster
scrapcomputing/ISABlaster
A software-defined ISA card powered by a Raspberry Pi Pico
24 parts53GPL-2.0
Questions
What parts does the Esp32 board use?
6 parts, built around the ESP32-DEVKITC-VE and TXS0108EPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 board KiCad files?
From the OysteinFalkeid/scatebot repository on GitHub, at the commit this page was made from: the board is Kicad/esp32_board/esp32_board.kicad_pcb and its schematic Kicad/esp32_board/esp32_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 board design in my own project?
Its repository states no licence, so its author keeps all rights: ask OysteinFalkeid before reusing the design.