Skip to the content
2 layers56 × 85 mmTriStepper, the printed circuit board in 3D
Size
56 × 85 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
57
Pads
190
Tracks, vias
214, 12
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Jun 2025
Updated
9 Oct 2025

Overview

TriStepper is an open-source printed circuit board by OpenRover, from the OpenRover/TriStepperController-PCB repository on GitHub. It is a 2-layer board of 56 × 85 mm with 33 parts on 57 nets, routed with 214 tracks and 12 vias.

Its parts include 9 resistors, 3 capacitors and 3 switches. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.

Parts

33
QtyValueFootprintReferences
4100RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R6, R7, R8
410KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3, R4, R9
4Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal_BoxesM1, M2, M3, PWR1
4MountingHole_PadMountingHole:MountingHole_2.7mm_M2.5_Pad_BareH1, H2, H3, H4
30.1uFResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderC1, C2, C3
3Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal_BareSW0, SW1, SW2
3~SOM:StepperDriverDRV0, DRV1, DRV2
2Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJMP1, PWR2
11KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1Arduino_Nano_ESP32Module:Arduino_Nano_ESP32A1
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal_BoxesWS2812
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal_BoxesSPI0
1Conn_01x07_PinConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal_BoxesRGB_Sensor1
1~SOM:Buck_ConverterCVT1

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the TriStepper PCB?

It measures 56 × 85 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TriStepper use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TriStepper KiCad files?

From the OpenRover/TriStepperController-PCB repository on GitHub, at the commit this page was made from: the board is TriStepper.kicad_pcb and its schematic TriStepper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TriStepper design in my own project?

Its repository states no licence, so its author keeps all rights: ask OpenRover before reusing the design.