Skip to the content
2 layers10 × 12 mmSHT4X sensor module, the printed circuit board in 3D

A compact 2-layer carrier board for the Sensirion SHT4x (SHT4xI-DIGITAL) temperature and humidity sensor. It exposes the sensor's I²C interface on a 4-pin 2.54 mm header, with on-board pull-ups and decoupling —…

Size
10 × 12 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
4
Pads
14
Tracks, vias
26, 2
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
24 Aug 2026
Updated
24 Aug 2026

Overview

SHT4X sensor module is an open-source printed circuit board by Open-Air-Foundation, from the Open-Air-Foundation/pcb-module-sht40 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 10 × 12 mm with 6 parts on 4 nets, routed with 26 tracks and 2 vias.

Its parts include 2 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.

README

README.md

AirGradient SHT4x Sensor Module — Hardware

KiCad hardware design files for the AirGradient SHT4x temperature/humidity sensor module — a plug-in sensor board used in AirGradient air quality monitors, including the Open Air Max.

Overview

A compact 2-layer carrier board for the Sensirion SHT4x (SHT4xI-DIGITAL) temperature and humidity sensor. It exposes the sensor's I²C interface on a 4-pin 2.54 mm header, with on-board pull-ups and decoupling — everything else lives on the host monitor.

Design structure

A single KiCad project in SHT4X-sensor-module/: one schematic sheet (sensor, connector, passives) and a 2-layer board.

Repository structure

text
SHT4X-sensor-module/         # KiCad project (schematic + board), production/
libraries/                   # Bundled symbol/footprint/3D libraries (SHT4x, logo)
graphics/                    # Icons and artwork

Key components

FunctionPartRef
Temperature/humidity sensorSensirion SHT4xI-DIGITALU1
Host connector (I²C, 4-pin 2.54 mm)Pin headerJ1
I²C pull-ups10 kΩR1–R2

Toolchain

  • KiCad (file format 2021-era, KiCad 6). Custom symbol/footprint/3D libraries are bundled in libraries/ and referenced project-relative through fp-lib-table / sym-lib-table — the project opens without any extra library setup.

Fabrication

SHT4X-sensor-module/production/ holds the released Gerber set (SHT4X-sensor-module-v1.zip).

Versioning & releases

Hardware revisions are tagged on this repository. Per-version release notes and the matching production file set are published on the GitHub Releases page.

License

This is open-source hardware. The design files in this repository are licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license — see LICENSE.

You are free to use, modify, and manufacture these designs, including commercially, provided you credit AirGradient and share derivative designs under the same license.

Maintainers

AirGradient hardware team.

Parts

6
QtyValueFootprintReferences
210KResistor_SMD:R_0402_1005MetricR1, R2
1100nf / 25VCapacitor_SMD:C_0402_1005MetricC1
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ1
1LOGOLogo:logoG***
1SHT4XI-DIGITALLibrary:SHT4XI-DIGITALU1

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the SHT4X sensor module PCB?

It measures 10 × 12 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SHT4X sensor module use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SHT4X sensor module KiCad files?

From the Open-Air-Foundation/pcb-module-sht40 repository on GitHub, at the commit this page was made from: the board is SHT4X-sensor-module/SHT4X-sensor-module.kicad_pcb and its schematic SHT4X-sensor-module/SHT4X-sensor-module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SHT4X sensor module design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).