2 layers97.2 × 75.2 mm
BlankingRelay Base
Open-2-Photon-Microscope/blanking_repeater
an electronic circuit to distribute blanking signal (or any type of ttl signal) to multiple outputs
27 partsGPL-3.0
2 layers120.2 × 75.2 mm
BlankingRelay Base
Open-2-Photon-Microscope/blanking_repeateran electronic circuit to distribute blanking signal (or any type of ttl signal) to multiple outputs
- Size
- 120.2 × 75.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 77
- Pads
- 223
- Tracks, vias
- 564, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Dec 2023
- Updated
- 20 Feb 2024
Overview
BlankingRelay Base is an open-source printed circuit board by Open-2-Photon-Microscope, from the Open-2-Photon-Microscope/blanking_repeater repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 120.2 × 75.2 mm with 40 parts on 77 nets, routed with 564 tracks and 0 vias.
Its parts include 9 connectors, 8 resistors, 7 ICs, 6 diodes and 6 switches.
README
README.mdblanking_repeater
an electronic circuit to distribute blanking signal (or any type of ttl signal) to multiple outputs
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | JST 7 | Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J3, J4, J5, J6, J7, J8, J9 |
| 6 | 220 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | 74LS08 | Package_DIP:DIP-14_W7.62mm_LongPads | U1, U2, U3, U4, U5, U6 |
| 6 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6 |
| 6 | SW_Push_DPDT | Maxime:maxi_DPDT_Angled | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R98 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R99 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Blanking In | Maxime:BNC_Socket_TYCO-AMP_LargePads | J2 |
| 1 | LM350_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U0 |
The 36 most common of 40 parts.
More from Open-2-Photon-Microscope/blanking_repeater
2- 2 layers
BlankingRelay Top1
Open-2-Photon-Microscope/blanking_repeater
an electronic circuit to distribute blanking signal (or any type of ttl signal) to multiple outputs
9 partsGPL-3.0
Similar boards
- 2 layers139.7 × 73.7 mm
- 2 layers149.4 × 177.4 mm
Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm
EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm
Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm
- 2 layers90.8 × 53.3 mm
- 2 layers59.6 × 109.5 mm
Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410 - 2 layers123.8 × 73.5 mm
Questions
How big is the BlankingRelay Base PCB?
It measures 120.2 × 75.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BlankingRelay Base use?
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BlankingRelay Base KiCad files?
From the Open-2-Photon-Microscope/blanking_repeater repository on GitHub, at the commit this page was made from: the board is PCB/BlankingRelay_Base/BlankingRelay_Base.kicad_pcb and its schematic PCB/BlankingRelay_Base/BlankingRelay_Base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BlankingRelay Base design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).