
Jitx design
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

A kvm that can switch one output USB C between two input USB C connections.
Kvm is an open-source printed circuit board by OleStrohm, from the OleStrohm/USB-C-kvm repository on GitHub, published under the MIT licence. It is a 4-layer board with 30 parts on 59 nets, routed with 331 tracks and 26 vias.
It is built around the HD3SS3212RKS. Its parts include 10 resistors, 7 ICs, 6 capacitors, 4 connectors and 1 switch. It belongs with the STM32 boards of this library.
A USB C kvm used to switch one output connection between two input connections.
This allows one to connect a peripheral to the output and a computer to each input, and then switch which computer it should be connected to with the press of a button.
These are the design goals I'm aiming for:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R7, R9, R10 |
| 3 | HD3SS3212 | VQFN20:VQFN20RKS | U2, U3, U4 |
| 3 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A | J1, J3, J4 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 30p | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 640 | Resistor_SMD:R_0805_2012Metric | R6, R8 |
| 2 | UCS3205 | VQFN20:VQFN19_3x3x0.9mm | U6, U7 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 3.32M | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 3300p | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 33u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 866k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | MAX17501AxTB | Package_DFN_QFN:TDFN-10-1EP_2x3mm_P0.5mm_EP0.9x2mm | U1 |
| 1 | STM32F030F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards





inaxeon/ocu2pciex8
This repository contains the design files for a PCIe x4 (x8 physical) to OCuLink adapter I designed to solve some difficult PC build problems some time ago.

30 parts, built around the HD3SS3212RKS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OleStrohm/USB-C-kvm repository on GitHub, at the commit this page was made from: the board is kvm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).