Skip to the content
2 layers94 × 98 mmVECTAR PSU Rev1a, the printed circuit board in 3D

PSU Revision 1

Size
94 × 98 mm
Copper layers
2
Thickness
1.6 mm
Parts
66
Nets
29
Pads
154
Tracks, vias
127, 21
Pours
17
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Mar 2026
Updated
1 May 2026

Overview

VECTAR PSU Rev1a is an open-source printed circuit board by OATS-SD-26, from the OATS-SD-26/VECTAR-PSU-Rev1 repository on GitHub. It is a 2-layer board of 94 × 98 mm with 66 parts on 29 nets, routed with 127 tracks and 21 vias.

It is built around the I6A4W020A033V-003-R, IRFB7437PBF and XT60PW-M, with the 100UF/35V, DS04-254-2-02BK-SMT and RA1113112R among its other parts. Its parts include 20 capacitors, 12 resistors, 5 connectors, 3 diodes and 3 transistors. It belongs with the power boards of this library.

Main components

7

Parts

66
QtyValueFootprintReferences
12CCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C7, C8, C9, C12, C13, C14, C18, C19, C20
12TestPointPSU-Rev1:KEYSTONE_5002TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12
4Jumper_2_OpenResistor_SMD:R_0603_1608MetricJP1, JP2, JP3, JP4
3100kResistor_SMD:R_0603_1608MetricR2, R7, R11
2IRFB7437PSU-Rev1:TO254P483X1016X1944-3BQ2, Q3
2XT60PW-MPSU-Rev1:AMASS_XT60PW-MJ1, J2
10.1uFCapacitor_SMD:C_0603_1608MetricC11
10.1uF/12VCapacitor_SMD:C_0603_1608MetricC6
11.89kResistor_SMD:R_0805_2012MetricR1
1100/1%Resistor_SMD:R_0603_1608MetricR6
1100nFCapacitor_SMD:C_0603_1608MetricC16
1100uF/35VPSU-Rev1:EHBSA035M1010608TC1
110kResistor_SMD:R_0603_1608MetricR3
110uF/35VCapacitor_SMD:C_0603_1608MetricC15
110uHPSU-Rev1:IND_BOURNS_SDR1307L1
113.7kResistor_SMD:R_0603_1608MetricR12
1150Resistor_SMD:R_0603_1608MetricR10
1220nFCapacitor_SMD:C_0603_1608MetricC10
122uF/12VCapacitor_SMD:C_0805_2012MetricC5
12N7002PSU-Rev1:SOT95P240X111-3NQ1
13.5kResistor_SMD:R_0603_1608MetricR8
13k/1%Resistor_SMD:R_0603_1608MetricR4
147uFPSU-Rev1:CAPAE660X600NC17
1500Resistor_SMD:R_0603_1608MetricR9
17k/1%Resistor_SMD:R_0603_1608MetricR5
1B1911PGPSU-Rev1:LED_B1911PG--20D000514U1930_HVKD2
1Conn_01x02_SocketPSU-Rev1:Rocker-SwitchJ3
1Conn_01x06_SocketPSU-Rev1:6-pin-connectorJ5
1DS04-254-2-02BK-SMTPSU-Rev1:SW_DS04-254-2-02BK-SMTS1
1FusePSU-Rev1:3-140-178F1
1I6A4W020A033V-003-RPSU-Rev1:CONV_I6A4W020A033V-003-RPS78
1LM74502DDFRPSU-Rev1:DDF0008A-MFGU1
1PTPS543021DRLRPSU-Rev1:DRL0006A-MFGU2
1RA1113112RPSU-Rev1:Rocker-SwitchSW2
1RedPSU-Rev1:LTST_S270KRKTD5
1XT90PW-MPSU-Rev1:AMASS_XT90PW-MJ6
1YellowPSU-Rev1:LTST_C190KSKTD4

Similar boards

  • 2 layers94 × 85 mmVECTAR PSU REV2, the printed circuit board in 3D

    VECTAR PSU REV2

    OATS-SD-26/VECTAR-PSU-REV2

    Revision 2 of the power supply unit (PSU) PCB for the VECTAR project.

    67 parts
  • 4 layers82.6 × 82.5 mmKitchen pcb, the printed circuit board in 3D

    Kitchen pcb

    AdamZatloukal/smart-home-hub

    ESP32 based smart home hub

    97 parts
  • 2 layers110 × 60 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V2

    Arduino controlled Spot Welder for battery welding

    57 parts78GPL-3.0
  • 2 layers100.3 × 142.2 mmPower board, the printed circuit board in 3D

    Power board

    makerspacelt/fun-cart

    Electric drift cart

    68 parts1BSD-2-Clause
  • 4 layers240 × 90.5 mmBILLEE Rover Control Module V1, the printed circuit board in 3D

    BILLEE Rover Control Module V1

    BILLEE-BroncoSTAR/billee-hardware-2027

    Hardware and firmware Repository for BILLEE URC 2027

    276 parts1MIT
  • 2 layers51 × 21 mmFOX JACK EXT BOARD TOP, the printed circuit board in 3D

    FOX JACK EXT BOARD TOP

    KaliAssistant/Fox-Jack

    Portable social-engineering LAN tool for automated payloads and wired audits — based on Luckfox Pico Max

    35 parts22GPL-3.0
  • 4 layers114.3 × 108 mmPellet, the printed circuit board in 3D

    Pellet

    Mouse-GYM/auto-trainer-hardware

    Repository for hardware, firmware, and software related to the Mouse-GYM modules

    202 parts

Questions

How big is the VECTAR PSU Rev1a PCB?

It measures 94 × 98 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VECTAR PSU Rev1a use?

66 parts, built around the I6A4W020A033V-003-R, IRFB7437PBF, XT60PW-M and 100UF/35V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VECTAR PSU Rev1a KiCad files?

From the OATS-SD-26/VECTAR-PSU-Rev1 repository on GitHub, at the commit this page was made from: the board is VECTAR-PSU-Rev1a.kicad_pcb and its schematic PSU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the VECTAR PSU Rev1a design in my own project?

Its repository states no licence, so its author keeps all rights: ask OATS-SD-26 before reusing the design.