Skip to the content
4 layers61.2 × 44.1 mmSTM32+Codec, the printed circuit board in 3D

This project is designed to interface STM32F405 with the audio codec WM8731. The board supports the development of audio applications.

Size
61.2 × 44.1 mm
Copper layers
4
Thickness
3.16 mm
Parts
70
Nets
101
Pads
310
Tracks, vias
602, 105
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20210606)
Created
10 Nov 2024
Updated
10 Nov 2024

Overview

STM32+Codec is an open-source printed circuit board by Nothingbutthebest1209, from the Nothingbutthebest1209/STM32F_Audio_Codec_PCB repository on GitHub. It is a 4-layer board of 61.2 × 44.1 mm with 70 parts on 101 nets, routed with 602 tracks and 105 vias.

It is built around the LM2594HVM-3.3, SJ1-3523N and AO3401A, with the USBLC6-2SC6 and WM8731SEDS among its other parts. Its parts include 22 capacitors, 21 resistors, 4 diodes, 2 inductors and 1 IC. It belongs with the audio and music boards and the STM32 boards of this library.

Main components

5

README

README.md

STM32F+Audio Codec PCB Design Project

Description

This project is designed to interface STM32F405 with the audio codec WM8731. The board supports the development of audio applications.

STM32F4 Pinout selection

I used STM32CubeMX software to configure STM32F405RGT6 MCU chip. The used connections are:

• USART2

• I2S2

• I2C1

• USB_FS

STM32F4 Pinout selection

Schematic Design

Schematic Design

PCB Design

Full tracks overveiw

Full tracks overveiw

Tracks with filled zones overveiw

Tracks with filled zones overveiw

3D overview

Top veiw
3D overview top veiw
Bottom veiw
3D overview bottom veiw

Parts

70
QtyValueFootprintReferences
822Resistor_SMD:R_0402_1005MetricR8, R9, R10, R11, R12, R13, R18, R20
5100nCapacitor_SMD:C_0402_1005MetricC6, C8, C9, C10, C11
4MHMountingHole:MountingHole_2.7mm_Pad_ViaH1, H2, H3, H4
30.1uCapacitor_SMD:C_0603_1608MetricC15, C16, C18
347kResistor_SMD:R_0402_1005MetricR16, R17, R19
212pCapacitor_SMD:C_0402_1005MetricC1, C2
21N5817Diode_SMD:D_0603_1608MetricD2, D3
21k5Resistor_SMD:R_0603_1608MetricR1, R21
21nCapacitor_SMD:C_0402_1005MetricC21, C22
22.2kResistor_SMD:R_0402_1005MetricR6, R7
22u2Capacitor_SMD:C_0603_1608MetricC5, C7
2330uCapacitor_SMD:C_0603_1608MetricC19, C20
2Conn_01x04Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_HorizontalI2C, UART
2SJ1-3523Ndigikey-footprints:Headphone_Jack_3.5mm_SJ1-3523NMic, Speaker
1100kResistor_SMD:R_0603_1608MetricR4
110KResistor_SMD:R_0603_1608MetricR2
110nCapacitor_SMD:C_0402_1005MetricC14
110uCapacitor_SMD:C_0603_1608MetricC17
1120uCapacitor_SMD:C_1206_3216MetricC12
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11uCapacitor_SMD:C_0402_1005MetricC13
1250mAFuse:Fuse_1206_3216MetricF1
1330Resistor_SMD:R_0402_1005MetricR14
139nInductor_SMD:L_0402_1005MetricL2
145Resistor_SMD:R_0402_1005MetricR3
147uInductor_SMD:L_Sunlord_MWSA0518_5.4x5.2mmL1
14u7Capacitor_SMD:C_0603_1608MetricC3
1600 @ 600MHzInductor_SMD:L_0805_2012MetricFB1
1680Resistor_SMD:R_0402_1005MetricR15
168kResistor_SMD:R_0603_1608MetricR5
168uCapacitor_SMD:C_1206_3216MetricC4
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1LEDLED_SMD:LED_0402_1005MetricD1
1LEDLED_SMD:LED_0603_1608MetricD4
1LM2594HVM-3.3Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1LOGOLogoL:LogoLG***
1PowerTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal+12V
1STM32F405RGTxPackage_QFP:LQFP-64_10x10mm_P0.5mmSTM32F
1SWDConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDSWD
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12BOOT
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6USBLC6
1USB_B_MiniConnector_USB:USB_Micro-AB_Molex_47590-0001USB
1WM8731SEDSPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmCodec

Similar boards

  • 6 layers38.5 × 33 mmPress CPU, the printed circuit board in 3D

    Press CPU

    Alexandr-Filatov/Press_CPU

    104 parts
  • 2 layers39 × 40 mmMdb vmc esp32s3, the printed circuit board in 3D

    Mdb vmc esp32s3

    hoangminhanhtai/mdb-esp32-master

    ESP32-based MDB Vending Machine Controller (VMC) with support for bill validators, coin changers, cashless devices, and EVA-DTS DEX/DDCMP telemetry for vending machine integration and management.

    53 partsMIT
  • 2 layers53 × 47.1 mmHot Swap, the printed circuit board in 3D

    Hot Swap

    ivanhorombe/Voltage-Regulator-FSAE

    Designed a voltage regulation PCB for racecar.

    22 parts
  • 2 layers50.8 × 76.2 mmSwitcher, the printed circuit board in 3D

    Switcher

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    20 parts397Apache-2.0
  • 2 layers39 × 40 mmMdb slave esp32s3, the printed circuit board in 3D

    Mdb slave esp32s3

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    46 parts190MIT
  • 4 layers50 × 58.5 mmLed spot, the printed circuit board in 3D

    Led spot

    ervanalb/lux

    Light control protocol

    53 parts8
  • 2 layers100.7 × 24.1 mmPCauslese, the printed circuit board in 3D

    PCauslese

    stonedDiscord/Automatenplatinen

    Reverse engineerte Hardware aus deutschen Spielautomaten.

    41 parts5BSD-2-Clause
  • 2 layers78.7 × 53.3 mmExternalCodec, the printed circuit board in 3D

    ExternalCodec

    lucidcoding/daisy-seed-development-kit

    A modular development kit for the Electrosmith Daisy Seed development board. Currently modules include the central breakout board, a MIDI adapter and an array of 16 potentiometers.

    26 parts29

Questions

How big is the STM32+Codec PCB?

It measures 61.2 × 44.1 mm and has 4 copper layers, 3.16 mm thick.

What parts does the STM32+Codec use?

70 parts, built around the LM2594HVM-3.3, SJ1-3523N, AO3401A and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32+Codec KiCad files?

From the Nothingbutthebest1209/STM32F_Audio_Codec_PCB repository on GitHub, at the commit this page was made from: the board is STM32+Codec.kicad_pcb and its schematic STM32+Codec.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32+Codec design in my own project?

Its repository states no licence, so its author keeps all rights: ask Nothingbutthebest1209 before reusing the design.