

30Pin Bluetooth PCB V3
- Size
- 32.7 × 15.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 36
- Pads
- 64
- Tracks, vias
- 82, 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Jul 2026
- Updated
- 25 Jul 2026
Overview
30Pin Bluetooth PCB V3 is an open-source printed circuit board by Notdbrand, from the Notdbrand/30Pin-Bluetooth-PCB repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 32.7 × 15.5 mm with 14 parts on 36 nets, routed with 82 tracks and 5 vias.
Its parts include 3 capacitors, 2 connectors, 1 IC and 1 inductor. It belongs with the radio and wireless boards of this library.
README
README.md30Pin-Bluetooth-PCB
A quick description of the repo, versions, parts used and reference material. Also a note, there is a bit of interference that I can here when connnected to this on my airpods pro 2s, probably my PCB. Less audible at lower volumes, if you know what could cause this, I'm all ears.
Contents of Repo:
- Version 1 was the initial design.
- Version 2 fixed the spacing for the 30 pin connector.
- Version 3 added a voltage regulator that stepped up the 3.3v to 5v (Untested). Made it just incase the 3.3v from the iPod wasn't enough (Bluetooth module runs fine on it while requiring 5v).
- Version 4 (An idea of version 4 at least) have two boards, one for the connector and another that wraps behind the ipod and has the Bluetooth module on it, just so its a bit more out of the way. Would also have some mount points for a 3D printed case. (Future version Maybe)
Parts Used:
Dock connector
For the dock connector I just removed one from an old alarm clock that had an iPod dock. The connector requires the pins 1, 2, 3, 4, 11, and 18 to be in place (Based off the iPod Dock Pinout in the references), but most connectors from docks should have all of them.
If anyone can find a listing for a 30 pin male dock connector with all the pins, please let me know. I have looked everywhere and can't find any new listings.
Custom PCB
For the PCB, I used pcbway to make a prototype board using the design I provided to them. They provided pretty good services but any company that makes PCBs should do.
Bluetooth Module
For the bluetooth module, I ordered one off aliexpress.
https://www.aliexpress.com/item/1005007130150424.html
Software:
KiCAD: Version 10
Reference material:
iPod Dock Pinout
https://pinoutguide.com/PortableDevices/ipod_pinout.shtml
Version 3 Surface Mount Parts:
https://www.digikey.com/en/products/detail/analog-devices-inc/LTC3525ESC6-5-TRMPBF/1115906 https://www.digikey.com/en/products/detail/murata-electronics/LQH32CN100K53L/1016218 https://www.digikey.com.au/en/products/detail/murata-electronics/GRM033R61A224ME90D/4904688 https://www.digikey.com.au/en/products/detail/kyocera-avx/02016D225MAT2A/10815044
Contact/ Improvements:
If you have any questions or suggestions, send them to notdbrand@protonmail.com or start an issue in this repo.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | MountingHole | Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | H1, H2, H3, H4, H5, H6, H7 |
| 1 | 0.22uF | GRM033R61A224ME90D:CAPC0603X33N | C3 |
| 1 | 10uF 6.3V | GRM155R60J106ME15D:CAPC1005X65N | C2 |
| 1 | 10uH | LQH32CN100K53L:IND_LQH32CN100K53L | L1 |
| 1 | 2.2uF | 02016D225MAT2A:CAPC0603X56N | C1 |
| 1 | Conn_01x11_Pin | Connector_PinHeader_1.27mm:PinHeader_1x11_P1.27mm_Vertical | J2 |
| 1 | Conn_01x30_Pin | Connector_FFC-FPC:Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_Horizontal | J1 |
| 1 | LTC3525-5 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1 |
More from Notdbrand/30Pin-Bluetooth-PCB
2- 2 layers29.7 × 15.5 mm

- 2 layers29.7 × 15.5 mm

Similar boards
- 2 layers116.8 × 30 mm

Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm

- 2 layers34 × 45 mm

2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm

- 2 layers45.3 × 42.7 mm

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm

- 2 layers62 × 24 mm

Questions
How big is the 30Pin Bluetooth PCB V3 PCB?
It measures 32.7 × 15.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 30Pin Bluetooth PCB V3 use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 30Pin Bluetooth PCB V3 KiCad files?
From the Notdbrand/30Pin-Bluetooth-PCB repository on GitHub, at the commit this page was made from: the board is 30Pin-Bluetooth-PCB V3/30Pin-Bluetooth-PCB V3.kicad_pcb and its schematic 30Pin-Bluetooth-PCB V1/30Pin-Bluetooth-PCB V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 30Pin Bluetooth PCB V3 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).