
Easyduino ESP32S3
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

Nitrokey 3 USB-A Mini NRF52 hardware
Nk3-nrf mini is an open-source printed circuit board by Nitrokey, from the Nitrokey/nitrokey-3a-mini-nrf52-hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 16.4 × 11.1 mm with 35 parts on 71 nets, routed with 469 tracks and 60 vias.
It is built around the TAXM32M4ZFBCCT2T. Its parts include 12 capacitors, 5 resistors, 3 ICs, 2 diodes and 1 connector. It belongs with the nRF52 and nRF5x boards of this library.
The hardware files of Nitrokey 3A Mini and Nitrokey Passkey. The firmware is here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 100n | Capacitor_SMD:C_0201_0603Metric | C5, C10, C11, C12 |
| 2 | 12p | Capacitor_SMD:C_0201_0603Metric | C1, C2 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C7, C9 |
| 2 | 4.7k | Resistor_SMD:R_0201_0603Metric | R8, R9 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C6, C14 |
| 2 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2 |
| 1 | 100p | Capacitor_SMD:C_0201_0603Metric | C4 |
| 1 | 180R | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 1M | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 49R9 | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 820p | Capacitor_SMD:C_0201_0603Metric | C3 |
| 1 | LED_RGBA | solo:RGB_LED_606 | D1 |
| 1 | SE050 | Package_DFN_QFN:UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm | U5 |
| 1 | TAXM32M4ZFBCCT2T | solo:Crystal-2mmx1.6mm | Y1 |
| 1 | TPD4S012DRYR-dk_TVS-Diodes | digikey-footprints:UFDFN-6_1.45x1mm | D2 |
| 1 | TestPoint | footprints:touchpad-curve | TOUCH1 |
| 1 | USB_A | footprints:usb-a-pattern | J1 |
| 1 | nRF52840 | Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mm | U1 |
| 1 | quad_serial_flash | solo:FLASH_2x3_USON8 | U3 |
The 32 most common of 35 parts.

Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards




Alia5/PiCCANTE
PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)



Sgw32/KungFuSID
Kung Fu SID is a firmware based on Kung Fu Flash which allows SID emulation
It measures 16.4 × 11.1 mm and has 4 copper layers, 0.6 mm thick.
35 parts, built around the TAXM32M4ZFBCCT2T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nitrokey/nitrokey-3a-mini-nrf52-hardware repository on GitHub, at the commit this page was made from: the board is nk3-nrf-mini.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).